Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
grateful user
 
don gilbert's Avatar
 
Join Date: Mar 2008
Location: collierville tn
Posts: 1,336
Garage
Finally getting started on the 70e. Need input.

Pretty solid cali car I picked up from a bud here in Memphis. Been sitting a few yrs but very solid and complete 70e except for engine. Wiring harness untouched, good glass, brakes still work, 15x7x8 real fuchs. The more I'm getting into it the better it gets. Taken care of by someone, and I hear it was Mike at Memphis Motor Werks, who brought the car from Ca to Memphis yrs ago. Dash is in great shape, all the problem rust area are not there, altho there is some rust to fix. Has SC flares done right which I intend to keep, as such, this will not be an original build. Original color..signal orange..and I just cant do it. I always wanted a black longhood but this silver sure looks nice. I'm leaning toward period correct hot rod. Stay tuned.









__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do.
Old 05-29-2017, 01:19 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Flojo's Avatar
 
Join Date: Jun 2012
Location: Germany
Posts: 4,140
Garage
Nice!
__________________
Regards, Flo / 79 SC streetrod - Frankfurt, Germany
Instagram: @elvnmisfit
Old 05-29-2017, 01:23 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
grateful user
 
don gilbert's Avatar
 
Join Date: Mar 2008
Location: collierville tn
Posts: 1,336
Garage

__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do.
Old 05-29-2017, 02:51 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
War Vet
 
matt930s's Avatar
 
Join Date: Mar 2010
Location: Charleston SC
Posts: 4,706
Garage
The E's are great cars...the flares look fine and silver or black will look great.

Do you know the original engine #? I have a 70e motor w/ triple webers and a 901 that came with it...

MattR
__________________
Dr. Phatt

Last edited by matt930s; 05-29-2017 at 05:02 PM..
Old 05-29-2017, 05:00 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
911T '72
 
DeRRis's Avatar
 
Join Date: Feb 2010
Location: Uddel, The Netherlands
Posts: 343
Garage
Quote:
Originally Posted by don gilbert View Post
Original color..signal orange..and I just cant do it.
Nice project! But are you sure the original is orange? Looks more like yellow to me
__________________
Dennis

Good drivers have dead flies on the side windows. (Walter Röhrl)
Old 05-30-2017, 07:36 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Registered
 
Flojo's Avatar
 
Join Date: Jun 2012
Location: Germany
Posts: 4,140
Garage
Quote:
Originally Posted by DeRRis View Post
Looks more like yellow to me
Yep.
And: I'd go 4 yellow!
Silver is for leasing-/business cars ;-)
__________________
Regards, Flo / 79 SC streetrod - Frankfurt, Germany
Instagram: @elvnmisfit
Old 05-30-2017, 09:53 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
1988 Carrera
 
shadowjack1's Avatar
 
Join Date: Apr 2011
Location: Slidell, LA
Posts: 1,532
Garage
Quote:
Originally Posted by DeRRis View Post
Nice project! But are you sure the original is orange? Looks more like yellow to me
Yes looks like yellow to me as well.
__________________
88' Carrera
79' SC gone (lost to Katrina)
75' Targa gone
72'914 gone
72' 914 gone too
Old 05-30-2017, 10:07 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Eng-o-neer
 
Tremelune's Avatar
 
Join Date: Dec 2011
Location: Los Angeles
Posts: 3,107
Nice. Any motor thoughts?
Old 05-30-2017, 10:46 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
Registered
 
Join Date: Apr 2005
Location: San Antonio, Texas YEEHAW
Posts: 5,291
Garage
Give a funky color such as yellow or orange time to simmer. Those really look cool on an older car. My car is supposed to be Sahara Beige but its is currently light ivory from a PO. Funky is expected on the longhood cars.

But for goodness sakes get rid of those gauge rings. Yikes
__________________
Matthew - drove Nurburgring with wipers on and no rain
1969 911E SOLD
2002 996 Cabrio
1995 993 Carrera 4 SOLD
2004 Land Rover Discovery II G4 Edition (Sold )
Old 05-30-2017, 11:00 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)
Under the radar
 
Trackrash's Avatar
 
Join Date: May 2007
Location: Fortuna, CA. On the Lost Coast near the Emerald Triangle
Posts: 7,129
Garage
Definetly a candidate for a nice hot rod. Being an E means little unless you are going all original and will be running MFI. Same thing for the trans. Now is the time to dump that mickey mouse original clutch.

I really like the silver. I guess if your plans are to eventually sell, silver may not be the most popular color.
__________________
Gordon
___________________________________
'71 911 Coupe 3,0L outlawed
#56 PCA Redwood Region, GGR, NASA, Speed SF
Trackrash's Garage :: My Garage
Old 05-30-2017, 01:42 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)
grateful user
 
don gilbert's Avatar
 
Join Date: Mar 2008
Location: collierville tn
Posts: 1,336
Garage
Underneath all that yellow is signal orange. If I didnt have an "orange car" already I would go that rt. Cant have two orange cars in the garage. I figured that since It will not have the original engine or trans, I might as well mix it up a little. More tear down tonight when I get off work.
Matt, the gauge rings will be gone!! Hollywood speedo has done gages for me before,
and will do these in a period correct dial.. I have budgeted 40g for this build,,with all work to be done by me in my shop.
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do.

Last edited by don gilbert; 05-30-2017 at 02:31 PM..
Old 05-30-2017, 02:09 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)
grateful user
 
don gilbert's Avatar
 
Join Date: Mar 2008
Location: collierville tn
Posts: 1,336
Garage
Will be looking for a core engine soon..3.0 or 3.2.. I really just want a case, crank and heads, so be on the look out for me.
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do.
Old 05-30-2017, 02:34 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)
 
grateful user
 
don gilbert's Avatar
 
Join Date: Mar 2008
Location: collierville tn
Posts: 1,336
Garage

Front suspension and all glass out. Didnt break anything but a few knuckles
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do.
Old 06-03-2017, 12:25 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)
Registered
 
seafeye's Avatar
 
Join Date: May 2003
Location: N.C.
Posts: 1,473
Great stuff. Don't forget to register your "E".

911E.org - The 911E Registry
__________________
What me speed?
Old 06-03-2017, 01:33 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)
Under the radar
 
Trackrash's Avatar
 
Join Date: May 2007
Location: Fortuna, CA. On the Lost Coast near the Emerald Triangle
Posts: 7,129
Garage
Very interesting the oil lines through the rockers for the front cooler.

Are you keeping it that way?
__________________
Gordon
___________________________________
'71 911 Coupe 3,0L outlawed
#56 PCA Redwood Region, GGR, NASA, Speed SF
Trackrash's Garage :: My Garage
Old 06-03-2017, 01:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #15 (permalink)
grateful user
 
don gilbert's Avatar
 
Join Date: Mar 2008
Location: collierville tn
Posts: 1,336
Garage
They are acutally outside the rockers..inlet on the pass. side and return runs down the drivers side.
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do.
Old 06-03-2017, 02:25 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)
grateful user
 
don gilbert's Avatar
 
Join Date: Mar 2008
Location: collierville tn
Posts: 1,336
Garage
I have been busy with work, but got all little time to get something done. More tear down, almost a bare tub. I guess there never is such a thing as rust free. A few bad spots. Battery area is toast, as is lower rear apron area all the way into the footwell area. A little fabricating and welding in order. Other than that, pretty solid. On the last pic you can see the original signal orange. Lucky for me the car has never been wrecked, everything measure right up. Upgraded my welder today, Lincoln 140. Still need to get shielding gas.



__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do.
Old 08-16-2017, 02:47 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)
grateful user
 
don gilbert's Avatar
 
Join Date: Mar 2008
Location: collierville tn
Posts: 1,336
Garage

__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do.
Old 08-16-2017, 03:12 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)
Reply


 


All times are GMT -8. The time now is 10:53 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.