|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2017
Location: houston, texas with Enzo SPCA # 8995
Posts: 459
|
questions about heat exchanger R&R
Just pulled the rusty heat exchangers and rusty Bursch muffler from my '74 Carrera When i put the new heat exchangers on, do you put RTV on the metal gasket that goes between the HE and the cylinder head? If so, i'd presume you'd use the orange stuff.
Antiseize on the barrel and hex nuts or locktite or noting? Ditto the RTV question where the heat exchanger meets the muffler. There'a a gasket between the two. thanx steve
__________________
Steve Meltzer '69 911E/bastard |
||
04-01-2019, 12:05 PM
|
|
|
Registered
Join Date: Jul 2000
Location: So. Calif.
Posts: 19,910
|
Gaskets can go on dry. Yes, apply anti-seize to all threaded fasteners.
Sherwood |
||
|
04-01-2019, 12:18 PM
|
|
|
Registered
Join Date: Oct 2017
Location: houston, texas with Enzo SPCA # 8995
Posts: 459
|
thanx again. steve
__________________
Steve Meltzer '69 911E/bastard |
||
|
04-01-2019, 06:41 PM
|
|
