![]() |
|
|
|
Registered User
Join Date: Mar 2013
Posts: 2
|
Automatic transmission problem...Help please
I have a 1984 944 non turbo.
With normal driving acceleration,the 2nd to 3rd shifts at about 66kph. I would like the trans to shift into 3rd under 60kph. To get the trans to shift into 3rd at 60kph, I have to lift off the accelerator pedal for a second or two. Is the shift point adjustable down to say 55kph?...if so how. |
||
![]() |
|
Proprietoristicly Refined
Join Date: Jul 2001
Location: ~Carefree Highway~
Posts: 5,833
|
I cannot give you an answer.
The last automatic I worked on was an old Audi 450SL. Here is the WSM automatic pages with topics that may help. ![]() There is an automatic transmission trouble shooting page in the WSM. I do not know of a way to change the shift points. Check your transmission fluid level and the shift cable???? GL & welcome J_AZ
__________________
1988 924S, 85,750K ..+ 1987 924S, 154K DD (+15K est. bad odo) |
||
![]() |
|
AFM #725
|
Wouldn't that be controlled by a computer
|
||
![]() |
|
Registered User
Join Date: Mar 2013
Posts: 2
|
No computer on the early 944.
Are the shifts controlled by engine vacuum?? |
||
![]() |
|
Registered User
|
No vacuum lines going to the trans on these, and no computer control.
|
||
![]() |
|
Registered
Join Date: Apr 2004
Location: Louisville Ky
Posts: 2,791
|
Downshift cable adjustment. The thing is too tight. Adjustment is on the throttle cam. Haynes manuel has the instructions to set the cable. Nothing to it.
__________________
Edgar 1984 Porsche 944 bone stock 1995 Mercedes E320 wagon 1970 Honda CB350 mint!!! |
||
![]() |
|
![]() |