|
|
|
|
| Author |
|
|
Registered User
|
Need help trying to locate (1) screw
I have a 1985/2 944 automatic and I can't seem to locate (1) screw that is needed to reinstall the shifter handle. It's the counter-sunk screw that goes into the side of the shifter on the right hand side. Without it, all the shifter wants to do is pull off. The part number is N0331651. Any help locating one of these screws would greatly appreciated! Thank you in advanced for all the help!
|
||
07-06-2015, 01:04 PM
|
|
|
Registered
|
Most of those type of screws are normal metric screws available at most any hardware store.
__________________
87 951 all stock exc. cup II's /94 968 6-spd, lowered,17in. RUF Speedlines, M030 anti- sways/ 94 968 Tip, Cup II's, otherwise stock |
||
|
07-06-2015, 01:20 PM
|
|
|
Registered
|
+1 ^
My local Ace Hardware has a huge assortment of metric fasteners. Bruce
__________________
1989 944 N/A 1995 Ford F150 4X4 2016 Infiniti QX-70 2016 BMW 1200GS |
||
|
07-06-2015, 01:53 PM
|
|
|
Registered
Join Date: Jan 2012
Location: NW Ohio
Posts: 9,733
|
Take the shift handle with you and test out the screw before buying.
|
||
|
07-06-2015, 02:04 PM
|
|
|
In the Fires of Hell.....
|
It's an M4x8, if you dig into the Pelican website information.
__________________
PCA Instructor: '88 951S - with LBE, Guru chips, 3Bar FPR, 1.3mm shimmed WG, 3120 lbs, 256 RWHP, 15 psig boost |
||
|
07-06-2015, 02:06 PM
|
|
|
Registered User
Join Date: May 2015
Posts: 106
|
I believe the Violent Femmes had a song about that...
|
||
|
07-06-2015, 02:18 PM
|
|
|
|
Registered User
|
Thanks for the info guys! Good idea on taking the shift handle with me and on the size of the screw. By the way, this part has been discontinued and no one carries replacements just for future knowledge. Thanks again y'all!
|
||
|
07-08-2015, 07:52 PM
|
|
1989 944 N/A 
944 Turbo
