![]() |
|
|
|
Moderator
|
Vacuum Limiter (Decel Valve) Vac Route?
I just installed the missing Decel Valve on my 928S. Is the vacuum route connected to the Fuel Regulator?
__________________
1981 Porsche 928 "Euro" Auto Gunsmoke Metallic Flat - Black Interior 1983 Porsche 928S "US" Auto Light Bronze (Copper) Metallic - Brown Interior **SOLD** ![]() |
||
![]() |
|
Registered User
|
I was looking at the vacume diagrams. I don't see a decel valve or anything like it on AFC controlled injection. I see one on the CIS but not the AFC
__________________
1979 928 85 Euro 2v motor,S4 Brakes and suspension, 1988 951 street legal track car(sold) Neon SRT4 track car |
||
![]() |
|
Moderator
|
I think I found it on Pelicans PET. Looks like it connects to a T which is connected to another T on the Drivers side vac tube on rear of throttle body.
Does this look correct? ![]()
__________________
1981 Porsche 928 "Euro" Auto Gunsmoke Metallic Flat - Black Interior 1983 Porsche 928S "US" Auto Light Bronze (Copper) Metallic - Brown Interior **SOLD** ![]() |
||
![]() |
|
Registered User
|
I didn't look at that year but..that's exactly what it does on CIS so it's right. I took mine out, it made a horrible whistle (the diaphragm was broken). The rpm's come straight down now and don't hesitate upon closed throttle and if I am fully closed and go to wide open with out cracking the throttle a tad it pulses a few times as it accelerates
__________________
1979 928 85 Euro 2v motor,S4 Brakes and suspension, 1988 951 street legal track car(sold) Neon SRT4 track car |
||
![]() |
|
Moderator
|
Hi Pete,
Yeah, this one came from 928 Intl as a used part. I made sure to do a vac test on it first before installing it. Yes, I have one on my CIS too, it also had a bad diaphragm, so I got one from 928 Intl as well. I got the diagram from the 1983 - 86 pdf.
__________________
1981 Porsche 928 "Euro" Auto Gunsmoke Metallic Flat - Black Interior 1983 Porsche 928S "US" Auto Light Bronze (Copper) Metallic - Brown Interior **SOLD** ![]() |
||
![]() |
|