Parts Needed \ WTB

[jamesjedi]

Still looking for SC/Carrera fenders that are more local SW Ontario.

Also need hard oil lines from the T stat to the front cooler.

Thanks.

[jamesjedi]

I need to make room. $200.

[tholyoak]

I have a set of oil lines

Todd

[jamesjedi]

Hi Todd. I will PM you if you would like. One of my lines "might" be OK.

[911 Rod]

Looking for a driver's side door latch for an 86 911. I believe many years, including 964, will work. Let me know what you have. Thx

[tholyoak]

I have a few of these kicking around.

Todd

Originally Posted by 911 Rod

Looking for a driver's side door latch for an 86 911. I believe many years, including 964, will work. Let me know what you have. Thx

[danny lawrence]

WTB 993 rear sway bar & drop links for a 993 C4S , 20 MM

[exc911ence]

I'm looking for a nice set of thick flange SSI heat exchangers for my 1979 SC 3.0L. I know it's a long shot but does anyone have a set that they don't need?

[JJ 911SC]

Originally Posted by exc911ence

I'm looking for a nice set of thick flange SSI heat exchangers for my 1979 SC 3.0L. I know it's a long shot but does anyone have a set that they don't need?

Have we got a "new" car?

[exc911ence]

Originally Posted by JJ 911SC

Have we got a "new" car?

We do!

[horizontallyopp]

Originally Posted by exc911ence

I'm looking for a nice set of thick flange SSI heat exchangers for my 1979 SC 3.0L. I know it's a long shot but does anyone have a set that they don't need?

Your friends at Concept-1 in Calgary can get the Dansk ones if you end up having to go new. Prices are quite reasonable compared to shipping from the US.

[Mr Beau]

WTB:

P290 or equivalent door pin removal tool.
Engine stand yoke.

[jamesjedi]

Edit; I have found what I need. Thanks


WTB early 964 cylinder heads. Do not need a complete set. I am looking for some heads with good ceramics. Please pm.

Thanks

[tholyoak]

I bought the P290 equivalent from this fellow

FS: Door Hinge Pin Removal Tool, P290, 000.721.290.20


If you like tools, it is well worth the price. If you just need it for a single application,
I may be convinced to lend mine out.

Todd

Originally Posted by Mr Beau

WTB:

P290 or equivalent door pin removal tool.
Engine stand yoke.

[curtisr]

DOM roll cage bought for a 924s, precision mitres, .095 (!) available in Kingston, ON. This cage features:

CAD Modeling and Bending: Our Porsche 944 roll bars and cages are NASA, SCCA and PCA-legal, constructed of DOM tube meeting sanctioning body and class rules. Tubes are bent on programmable, numeric-controlled rotary-draw benders, for high bend quality. Precision Tube Notching: Tubes are then precision-notched using templates that created specifically for 944 roll bars and cages.

There is no brand name.

Paid more than $750 Cdn. Asking $450.

curtisr57@gmail.com

Roger

[JJ 911SC]

Fog light Tensioner.

Need 1 x 22, 26 and 27.

[Uwon]

Straight section should be in good condition. Don’t care about the curved ends as they will be cut of.
Thanks,
Johan

[jamesjedi]

Still looking for SC/Carrera fenders that are more local SW Ontario.

[rywats]

Looking for sugar scoop/h5 bracket assemblies, prefer around Edmonton or people who won’t mind shipping.

[unclebilly]

Needed 1 or 2 944 Valve Covers (or 928). My son and I are building Valve Cover Racers and want to represent our brand... We would need these by the end of this week so local and cheap would be ideal!

ssherman (at) trican dot ca