What did you do to your car today?

[nutless_neo]

Originally Posted by mAd924

Shelf in place.

That looks pretty good. What kind of carpet did you use and what material did you use for the shelf? I have to do mine, the whole rear area is the pits. I'm going to have to replace all the carpet. Somehow water is getting into the trunk area. I think it may be coming in around the locking pins too because I just put new ones on and they're already rusty. Ugh.

[J1NX3D]

its just MDF. used a sheet of cardboard to cut a template. i covered it in black material used in car audio for subwoofer enclosures.

[otto_kretschmer]

I drilled a hole in the screw that locks the shift linkage on the tranny and I lockwired it.

Harbor Freight had the lockwire and pliers so I was finally able to fix the problem of that shift linkage screw getting loose and me having to tighten it twice a year

[Ederd]

Had to Frankenstein my distributor/ign coil wire to get home lastnight. Wires only had 100 miles of use on them before they became faulty and broke causing me to stall continuously . Of course me having to cut up the boot to rig the wire voids any warranty. Crap!

[Dean924s]

Got pissed off at my car as well. The wires for the speed and reference sensors finally decided to come apart at the plug stranding me at of all places AutoZone as I was getting a new battery for the truck. SO today I looked at the wires but with it being 20 something degrees out there I just closed the hood kicked the left front tire and went inside. I am now pondering new sensors or it may be the kick in the but I need to install the MS I have been working on for a couple years now.

[pfarah]

Dean,

Where in MA do you reside?
Just wondering since I'm fairly new to the hobby, it would be great to find some local contacts.

Patrick

[ewalt98]

Moved the poor 944 back to the garage where it belongs after finishing up a project with on my truck. Got to about 15' F today, and she still started up on the first (longish) crank. Blew the snow off only to find 1/4 inch of ice coat covering it.
Think I'll swap out my summer tires for the all seasons now

[mikepellegrini]

I polished and waxed my NA

[POPS 83 944]

Took the new hood and nose panel to the painter, he will call during the week with the price of fixing and painting both pieces.

[S Decker]

Took interior out of the wrecked 87na. Getting ready to clean the carpets and install them in an 85.5na that I am fixing up.

[Racerbvd]

Removed a fender & door

[Gawernator]

I always wondered how to do that, lol

[redstrosekNic]

Hooked it up to the trickle charger...

[J1NX3D]

Diagnosed why my heater is stuck on full, its a broken clip.

There's 3 per car, i could see only two though. the top arrow is the broken one.



Also put in a new black leather shifter boot.

[Gawernator]

I'm not sure why, but someone installed your dash controls backwards!!!!

[J1NX3D]

I'm mirror imaging all my pics to troll you!

anyone know what this is on the back of the glove box? looks like another light housing

[Gawernator]

I think the nitrous goes in there

[Dean924s]

Originally Posted by pfarah

Dean,

Where in MA do you reside?
Just wondering since I'm fairly new to the hobby, it would be great to find some local contacts.

Patrick

Maynard. There are at least 6-7 944 owners here on pelican and over on Clarks that are in eastern MA

[ernie9944]

Originally Posted by Gawernator

I'm not sure why, but someone installed your dash controls backwards!!!!

So that the young one migth not get confuse betweem a right & left hand drive cars we are sending you pics of both.May we suggest that you study them in your spare time which you seem to have a lot.Rigth hand drive (design to drive on the wrong side of the road in countries such as England- Australia ect ect.Left hand drive which is the opposite of rigth hand drive design the be driven all over the world.

[Gawernator]

Somebody broke mAd924's car to be backwards and go on the wrong side of the road!!!!!