Recommendation for 2.7 P&C wanted

[304678]

Excuse my ignorance but I am sorting things out for a friend. He has a 2.7S (1976) and could use new P&Cs instead to refurbish his current set. Is there an (affordable) alternative for Mahle?

Thanks in advance,

Richard

[304065]

Richard, only nikasil is QSC, search under 'QSC" and "Supertec" for more

[YTNUKLR]

replated cylinders...and in-spec Mahle pistons that were made for Nik

or replated cylinders and JEs

or QSC

[cnavarro]

We make 89 to 93mm for the 2.7, but there is the "affordable' tag in the above post, and we're the most expensive. They are in the Pelican catalog.

[304678]

Thanks John. I contacted Henry.

Scott. We consider to have the cyl replated and new rings for the pistons. We would like to compare those costs vs an alternative new set like apparently QSC.

Charles. Affordable because it's for a guy who only drives 2000 mls a year, the car being a 76 and the owner who is not too dedicated to Porsche.

Thanks for the replies.

Richard