|
|
|
|
| Author |
|
|
Registered
|
cross post- 964 rod length question
I have run into both Carrillo and Pauter rods that are about 2mm longer for 964 does anyone know why these are made for 964? thanks Bob
|
||
07-04-2016, 08:24 PM
|
|
|
Registered
Join Date: Feb 2007
Location: Northeast
Posts: 463
|
Long rods
They are used with pistons with a reduced compression height-less rod angle
means higher RPM capability-and makes better power due to increased dwell time.
__________________
Mark www.exotechpower.com 1981 Targa-messed with. 91 C2 supercharged track rat Radical Prosport-irritates the GT3 guys 40 years of rebuilding services |
||
|
07-05-2016, 04:37 AM
|
|
|
Registered
|
Interesting Mark , so not recommended for use with Factory 3.8 rsr pistons? even if they are the 11.3 ones? wouldn't you need to shim the cyl. base also? thanks Bob
|
||
|
07-05-2016, 09:35 AM
|
|
|
Registered
Join Date: Feb 2007
Location: Northeast
Posts: 463
|
No. RSR pistons are built for a specific rod.
__________________
Mark www.exotechpower.com 1981 Targa-messed with. 91 C2 supercharged track rat Radical Prosport-irritates the GT3 guys 40 years of rebuilding services |
||
|
07-05-2016, 01:09 PM
|
|
