Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Miscellaneous and Off Topic Forums > Off Topic Discussions


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
JOT MON ABBR OTH
 
Groesbeck Hurricane's Avatar
 
Join Date: Feb 2001
Location: USA
Posts: 3,238
Post lesson learned: putting up square bales

As we are always looking for ways to work smarter we tried a new scheme this year for putting up square bales. We had a three person team (again) and the person running the baler had two on tractors, one driving a truck, and six stacking on trucks. The three of us were able to stack as quickly as the six person team with less effort.

We were able to acquire a large quantity of pallets for the very reasonable price of "come and get them and they are yours!".

Pallets were staged in stacks throughout the field after baling operations started.

One person drove the tractor with pallet forks on the front and a pallet on the forks. We discovered that three bales per layer and three layers (nine bales per pallet) worked best on the uneven ground. Could go four layers if the ground is even.

Move pallet to location of people and they do not have to lift high.

Drop pallet for loaders to finish final layer and tractor goes to get new pallet.

Areas with good density of bales the pallets can be left on the ground.

At the end it was one person on the tractor moving bales to the barn and stacking them still on the pallets. Easiest we have EVER done it!

If we had to stack on a trailer we could have loaded the pallets directly on a flatbed and kept going. None of us were too terribly worn out at the end of the day.

Kept track of fuel consumption this time, 60HP tractor used .5 gallons of diesel per hour. Not too shabby!

__________________
David
'83 SC Targa (sold ) MANLY babyblue honda '00 F250 7.3L (MINE!)
'15 F250 Gas (Her Baby) '95 993 (sold )
I don't take scalps. I'm civilized like white man now, I shoot man in back.
Old 06-18-2012, 06:37 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Seahawk's Avatar
 
Join Date: Jul 2004
Location: Maryland
Posts: 31,419
That sounds very ingenious. Did you take pictures, David?
__________________
1996 FJ80.
Old 06-18-2012, 07:47 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
JOT MON ABBR OTH
 
Groesbeck Hurricane's Avatar
 
Join Date: Feb 2001
Location: USA
Posts: 3,238
Paul,

We DO need to take photos. I have pallets stacked in front of one row and round bales in front of the other row. Scared of theft as hay appears to be going up in value right now....


Nota,

We paid our helper a rate per hour, provided all drinks (gateraid, tea, water), and paid for lunch but not breakfast or supper. But you are very correct, know what you are getting before getting involved! Hard work is what it really is!!! We have been lucky in having repeat helpers over the past three years. Always had trouble with getting good help in the years before. Paid them at the end of the day and never saw them again. Same way then as well, we provided one meal plus pay.

Also, treat workers as independant contractors, they are NOT employees and they understand that going in.
__________________
David
'83 SC Targa (sold ) MANLY babyblue honda '00 F250 7.3L (MINE!)
'15 F250 Gas (Her Baby) '95 993 (sold )
I don't take scalps. I'm civilized like white man now, I shoot man in back.
Old 06-18-2012, 08:28 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
one of gods prototypes
 
bell's Avatar
 
Join Date: Nov 2001
Location: Orlando florida
Posts: 9,741
Garage
Send a message via AIM to bell Send a message via Yahoo to bell
that's awesome....is good to see cows are going to get a square meal
__________________
Brought to you by Carl's Jr.
Old 06-18-2012, 08:42 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Get off my lawn!
 
GH85Carrera's Avatar
 
Join Date: Nov 2007
Location: Oklahoma
Posts: 84,766
Garage
A friend of mine with a ranch bought a square baler that was almost new real cheap at an auction. After one use he figured out why it was cheap. He went out and bought a round bailer and it is easy to move those round bales with his truck and the spike. He has a few dozen longhorn cattle and 6 horses to keep fed in the winter.
__________________
Glen
49 Year member of the Porsche Club of America
1985 911 Carrera; 2017 Macan
1986 El Camino with Fuel Injected 350 Crate Engine
My Motto: I will never be too old to have a happy childhood!
Old 06-18-2012, 08:43 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Kantry Member
 
oldE's Avatar
 
Join Date: Feb 2001
Location: N.S. Can
Posts: 6,791
Hmmm.
Still sounds like a lot of work.
We have an extra bale chute on the baler and tow a wagon behind as we bale. The wife drives the tractor, I load the wagon with the bales as they come off the chute. We load two wagons and haul them to the barn, where we use a conveyor to get them into the mow.

I suspect your storage area is ground level and more spacious than ours. We put about 300 in our barn for the horses and do up another few hundred for some friends. I like those ones, I don't have to unload the wagons.

Yeah, I'm a lazy SOB.

Best
Les
__________________
Best
Les
My train of thought has been replaced by a bumper car.
Old 06-18-2012, 09:05 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Registered
 
Jim Bremner's Avatar
 
Join Date: Jan 2006
Location: Fullerton,Ca
Posts: 5,463
[img]http://forums.pelicanparts.com/uploads20/pot1340039501.jpg[/img I was going to use my profits for a sweet slantnose cabriolet!
__________________
" Formerly we suffered from crime. Today we suffer from laws" (55-120) Tacitus
Old 06-18-2012, 09:13 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Registered
 
Jim Bremner's Avatar
 
Join Date: Jan 2006
Location: Fullerton,Ca
Posts: 5,463
__________________
" Formerly we suffered from crime. Today we suffer from laws" (55-120) Tacitus
Old 06-18-2012, 09:14 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
JOT MON ABBR OTH
 
Groesbeck Hurricane's Avatar
 
Join Date: Feb 2001
Location: USA
Posts: 3,238
Glen,

Does he still have the square baler, selling at a cheap price???? :-)

Round bales are easier to pull out and drop. Per tonne they are cheaper to feed, people will not pay as much money for them by weight as they will for square bales. Horse people prefer square bales as most do not have any equipment to handle the round bales. Round bales can get moldy and make your horses sick. Not as big an issue when you are feeding cows and other slaughter animals that you do not expect to live for more than a few months to a year. Not as big a deal when you are keeping Angus and such overbred breeds who will not be abel to live and produce for more than five or six years, as a generalized statement.

Our horses go up to 30, the cows are still producing up to about 20. Square bales are easier on their health.

Also, round balers require higher horsepower tractors which translates into more cost to buy and run. I'm on the shoestring end of the scale....


Les,

I hear ya! Still, that is tough work and you are handling them twice even with a thrower if you were to invest in one. Conveyor is definately the way to go! Our main hay barn has no electricity and is about 1/2 mile from the house. I can get about 2,160 bales in the barn using this stacking method or close to 3,000 using the method you are using. Yes, ground stack (on pallets to raise the hay up) and clear run to the roof. Only purpose of the barn is for storage.

I agree completely with you!!! I prefer the bales sold as they come out of the chute and loaded by someone else!


Jim,

Wrong type of bale but I bet they bring more money!!!!!
__________________
David
'83 SC Targa (sold ) MANLY babyblue honda '00 F250 7.3L (MINE!)
'15 F250 Gas (Her Baby) '95 993 (sold )
I don't take scalps. I'm civilized like white man now, I shoot man in back.
Old 06-18-2012, 09:38 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)
19 years and 17k posts...
 
azasadny's Avatar
 
Join Date: Jul 2002
Location: Dearborn, MI (Southeast Michigan)
Posts: 17,444
Garage
Square grouper!

Quote:
Originally Posted by Jim Bremner View Post
Square grouper!
__________________
Art Zasadny
1974 Porsche 911 Targa "Helga" (Sold, back home in Germany)
Learning the bass guitar
Driving Ford company cars now...
www.ford.com
Old 06-18-2012, 04:43 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)
Registered
 
pete3799's Avatar
 
Join Date: Nov 2008
Location: Vermont
Posts: 7,431
Garage
This is how we do it.
Most are going to round bales though.
__________________
Pete
79 911SC RoW
"Tornadoes come out of frikkin nowhere. One minute everything is all sunshine and puppies the next thing you know you've got flying cows".- Stomachmonkey
Old 06-18-2012, 04:51 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)
Registered
 
Join Date: Apr 2004
Location: Northern Arkansas
Posts: 4,482
Garage
re putting up hay, I've found it's best to be the guy on the tractor.
But the palletts sound like a great idea; use what works for you.
Jim
__________________
down to jap bikes that run and a dead Norton
Old 06-18-2012, 05:31 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)
 
Detached Member
 
Hugh R's Avatar
 
Join Date: May 2003
Location: southern California
Posts: 26,964
Pallets sound good. I lifted hay bales onto trucks/trailers a few times 40 years ago. Brutal work.
__________________
Hugh
Old 06-18-2012, 06:19 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)
Kantry Member
 
oldE's Avatar
 
Join Date: Feb 2001
Location: N.S. Can
Posts: 6,791
Quote:
Originally Posted by Groesbeck Hurricane View Post

Our main hay barn has no electricity and is about 1/2 mile from the house. I can get about 2,160 bales in the barn using this stacking method or close to 3,000 using the method you are using. Yes, ground stack (on pallets to raise the hay up) and clear run to the roof. Only purpose of the barn is for storage.
You are definitely doing it the best way, but....

I wonder if you were able to build a sled which could be pulled behind the baler and would allow someone to load a pallet with 9 bales then release it and drop another pallet onto the sled to be loaded as you moved around the field?



Sorry for the quality of the quick sketch. This would allow you to get your hay onto the pallets with one person on the tractor and one other person stacking on the pallets. No walking around the field to pick up hay.

I told you I was lazy!
Best
Les
__________________
Best
Les
My train of thought has been replaced by a bumper car.
Old 06-19-2012, 03:09 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)
"O"man(are we in trouble)
 
widgeon13's Avatar
 
Join Date: Nov 2005
Location: On the edge
Posts: 16,452
Lesson I learned on handling bales of hay, wear a long sleeve shirt. Wish I could remember what I was paid fifty year ago to do this kind of work. Hot dirty work!
Old 06-19-2012, 03:15 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #15 (permalink)
Double Trouble
 
targa911S's Avatar
 
Join Date: Nov 2002
Location: North of Pittsburgh
Posts: 11,705
all that then ya gotta stack in in the barn too.
Old 06-19-2012, 04:39 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)
Registered
 
lin7310948's Avatar
 
Join Date: Mar 2002
Location: concord,nc
Posts: 1,409
i spent a couple of summers bucking and hauling green pea hay in the dayton washington area in the summer of 1959 and 1960. it was used for dairy cattle feed at that time. bales were bound with wire and weighed in the 100 t0 125 pound range. it was really hot and dusty work and we were paid 15 dollars per day..6 a.m. til 6 p.m.. had to wear leather chaps..jeans would not last a day before wearing holes in the knees and thigh areas..literally would spit mud when working inside due to the dust!
__________________
69 bronco..... 91 mustang ssp santa clara county sheriff's office ...2017 focus rs tuned on 93 400 chp

Last edited by lin7310948; 06-19-2012 at 07:09 AM..
Old 06-19-2012, 05:50 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)
Regenerated User
 
72doug2,2S's Avatar
 
Join Date: Jul 2003
Location: FL
Posts: 18,082
Garage
Sorry, I'm getting hay fever just reading this.

We need more cow bell.
__________________
My uncle has a country place, that no one knows about. He said it used to be a farm, before the motor law.
'72 911T 2,2S motor
'76 BMW 2002
Old 06-19-2012, 05:54 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)
Bill is Dead.
 
cashflyer's Avatar
 
Join Date: Jul 2005
Location: Alaska.
Posts: 9,633
I remember being on my grandmothers farm as a young kid and watching my father and uncles loading trailers full of square bales. That was in Frankfort, Indiana.

I haven't been back on a farm since she died in the late 70s. I miss that place.
__________________
-.-. .- ... .... ..-. .-.. -.-- . .-.
The souls of the righteous are in the hand of God, and no torment will ever touch them.
Old 06-19-2012, 06:09 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #19 (permalink)
Takin' hard left turns
 
Amail's Avatar
 
Join Date: Dec 2004
Location: So Cal
Posts: 1,412
Having never been near a farm, I find this stuff fascinating! I love learning about big doin's that I know nothing about.

Old 06-19-2012, 06:16 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #20 (permalink)
Reply

Thread Tools
Rate This Thread
Rate This Thread:

 


All times are GMT -8. The time now is 10:29 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.