![]() |
|
|
|
Registered
|
How do I identify door window frames
Trying to determine year and model info for a door window frame. Thanks for any help.
![]() |
||
![]() |
|
Registered
|
picture will help
Ivan
__________________
1985 911 with original 501 645 miles...807 319 km "The difference between genius and stupidity is that, genius has its limits". Albert Einstein. |
||
![]() |
|
Registered
Join Date: May 2005
Location: Langley, BC, Canada
Posts: 291
|
Black or shiny is one way to identify, I think they started anodizing the frames in 1972 or 73, and the early door frames were polished. Rear quarter windows were pop out until 72 also I think, and then they were a solid frame.
Other than that, I have had personal experience dismantling 1970 911 and 67 912, and the door frames were very similar. Not sure what all of the differences were, but I think that the door frames were the same all the way till late 80's. Someone can correct me if I am wrong.
__________________
1970 911 T 2004 Carrera 4S |
||
![]() |
|
Been here a while
Join Date: Apr 2004
Location: East coast, west coast, typ. 35,000 ft
Posts: 2,433
|
coupes are different from targas, otherwise, basically they all interchange....and anything from 1969 thru the 993 could works, either they where polished (bright) or black.
photo would help a lot
__________________
looking for 1972 911t motor XR584, S/N 6121622 |
||
![]() |
|
Registered
|
Picture of window frame in question
This is the window frame in question.
![]() |
||
![]() |
|
Registered
|
Sorry the picture did not show up. Trying again.
![]() |
||
![]() |
|
![]() |
ROW '78 911 Targa
|
Must be a jpeg file under 5 MB to magically appear ...
__________________
Dennis Euro 1978 SC Targa, SSI's, Dansk 2/1, PMO ITBs, Electric A/C Need a New Wiring Harness? PM or e-mail me. Search for "harnesses" in the classifieds. |
||
![]() |
|
![]() |
Thread Tools | |
Rate This Thread | |
|