![]() |
|
|
|
Registered
Join Date: Feb 2003
Location: Petaluma - San Francisco Area
Posts: 555
|
Brake Caliper Piston Alignment
I am rebuilding the brake calipers on my 74 911 and I want to know how close do I have to be to the 20 degree piston alignment. Can I eyeball it or do I have to get it exact? What happens if it's off by a little?
__________________
PorschePilot 74 911S Targa - High Quality 2.7 Rebuild and Full Body Restoration MID9 Member Beechcraft V-Tail Bonanza (Fly'n high and low) |
||
![]() |
|
Moderator
|
As w/ most things in life the closer to spec the better. It's easy enough to make a tool that will allow fairly exact orientation.
__________________
Bill Verburg '76 Carrera 3.6RS(nee C3/hotrod), '95 993RS/CS(clone) | Pelican Home |Rennlist Wheels |Rennlist Brakes | |
||
![]() |
|
Registered
Join Date: Feb 2000
Location: Dallas, TX
Posts: 4,612
|
Print the picture out, cut out the angle and trace it onto a a piece of cardboard. Voila!! You have a tool.
Angle courtesy of MS Paint. ![]()
__________________
Neil '73 911S targa |
||
![]() |
|
Registered
Join Date: Feb 2003
Location: Petaluma - San Francisco Area
Posts: 555
|
Thanks!
__________________
PorschePilot 74 911S Targa - High Quality 2.7 Rebuild and Full Body Restoration MID9 Member Beechcraft V-Tail Bonanza (Fly'n high and low) |
||
![]() |
|