Need a measurement on the fan

[3liter914-6]

Hi,

I posted earlier, but my actual question was buried in the text. If someone has a vernier caliper handy, I need to know how far the face of the fan sticks out from the fan ring.



Thanks for any help.

Adam

[conquest]

Hope this helps ... all arrows in the attached picture are flush with each other.

[3liter914-6]

Originally posted by conquest
Hope this helps ... all arrows in the attached picture are flush with each other.

That helps a lot. Essentially the face of the fan is flush with the outer rim of the housing.

Thanks

[Grady Clay]

Different fan housings are machined (cast) for different amperage alternators. This affects your dimension question.

Be aware.

Best,
Grady