|
|
|
|
| Author |
|
|
Registered
|
__________________
John Adams 1980 ROW 911SC |
||
09-20-2006, 03:02 PM
|
|
|
nice doggie
Join Date: Oct 2002
Location: Denver, CO
Posts: 1,478
|
How I did my badge
I cut off the 911 part of the logo and sanded/polished the edge. I then sanded/polished the front. I took a scrap of aluminum and made it slightly larger than my badge to make a backer plate. I drilled three holes in the plate so the existing studs on the back could go through. I ran a little die down the studs to thread them and found some little aluminum offsets at my local hardware store to extend their length. The badge is fastened to my car with some big washers and nuts.
__________________
Jerry 78 SC hotrod 02 Mini Cooper S |
||
|
09-20-2006, 04:54 PM
|
|
|
Registered
|
id like to get a badge for mine but i dont care for the 911sc badge. Is there an aftermarket badge or even a stock one one that spells out Super Carrera?
__________________
82 SC , 72 914 |
||
|
09-20-2006, 04:57 PM
|
|
1980 Porsche ROW 911SC 3.0L
Porsche
1972 porsche 914
