|
|
|
|
| Author |
|
|
Registered
Join Date: Mar 2008
Location: St.Louis MO
Posts: 447
|
Ambient Temperature & Valve Lash
I am currently in the midst of setting the valve lash in my unknown mileage 3.2L in an unheated garage. It's about 50 Degrees out here and will be for a few days. Using the "back side" method I've found a couple valves that are less than .0025 and I'm just wondering if setting the lash nearly 20 degrees less than the recommended 69 degrees is going to cause problems for me?
On a positive note I put an allen wrench on all lower head studs and all appear to be intact! I was happy. |
||
04-03-2008, 08:09 PM
|
|
|
Remember
Join Date: Jun 2003
Location: California
Posts: 221
|
It's not going to make a difference.
__________________
Gary 1975 911S G50 3.5 Twin Turbo |
||
|
04-03-2008, 09:47 PM
|
|
