|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2006
Location: Steamboat Springs, CO
Posts: 98
|
Window net installation
Need the benefit of other's experience.
Nearly finished building my RSR clone racer and am confounded by how to attach the lower part of the window net to the roll cage. Bottom of net to roll cage is 5.75 inches. Any suggestions or photos? Chris 
__________________
Chris 2002 Boxster S - summer car Ford Edge - winter car Sold in 2017, 911 '73 RSR Clone, Vintage Racer. Miss it every summer. |
||
04-13-2008, 08:33 AM
|
|
|
Registered
Join Date: May 2006
Location: sacramento, ca
Posts: 98
|
On my previous race car I used small plastic covered cable (1/8th inch I believe) I bought it by the foot at the local hardware store. They sell the aluminum crimps to permanently attach cable. One end around the roll cage and one through a hole in that aluminum strip on your window net.
__________________
1985 911 "turbo look" 2008 Foose F150 (free truck) 2002 Mercedes Benz S55 |
||
|
04-13-2008, 09:06 AM
|
|
|
Registered
Join Date: May 2005
Location: Phoenix, AZ
Posts: 203
|
Window Net Options
I did this install on my two RSR's. Here are two options for you to consider.
You could also not weld a tab to the car and just wrap the cable around the cage.    
|
||
|
04-13-2008, 09:15 AM
|
|
|
Registered
Join Date: Aug 2006
Location: Steamboat Springs, CO
Posts: 98
|
Cable idea is simple and easy. Will head to ACE and do that that afternoon.
Thanks for the help guys. Chris
__________________
Chris 2002 Boxster S - summer car Ford Edge - winter car Sold in 2017, 911 '73 RSR Clone, Vintage Racer. Miss it every summer. |
||
|
04-13-2008, 09:37 AM
|
|
