Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rating: Thread Rating: 1 votes, 4.00 average.
Author
Thread Post New Thread    Reply
zugelassener benutzer
 
teamfee3's Avatar
 
Join Date: Dec 2008
Location: Towson MD
Posts: 545
Garage
86 Carrera before and after in progress

I was casually looking for an 87-89 Carrera in white with no wing when a friend told me about a black 86 Carrera nearby for sale that was super clean. Another friend knew the guy and we went down and I bought it on the second visit. Local mechanic said it was a great by at the price. A/C and cruise dnf but who cares it had polished 9" Fuchs a sunroof, no wing, $8,000 in receipts, and a sunroof.

I drove it for a while, took it to some friends at TPC for a spin and it checked out, maybe 5th gear change a little fidgety but smooth, solid, nice car. The battery / alternator light started coming on at idle and the odo takes a crap. I went to the beach for a couple of weeks and cam back to find it dead. Before it goes out it get's a Momo Prototipo

BEFORE

AFTER (horn button with wheel too small to fit)
Charged the battery and ran it out to Ralph's for an alternator. While it's there change the engine and tranny fluids. Big debate on the fan re-do, stock, polished, painted, red, orange, gulf blue, silver.

BEFORE

AFTER, gloss black housing with silver fan, keep it clean
Also, while it's ther eI'll pull the sppedo and send it to Palo Alto and get it fixed and re-do the face by removing the KPH markings and numbers. Considered going retro green numbers and needle but too fussy, "just clean it up" said Chuck. Priced getting the Martini logo on the face small at the botton but it was $278 to do it so forget it.
BEFORE
Ralph calls. "Has your car been shifting OK?" "Yep, sometimes a little funky out of 5th when commuting home but it's probably me getting used to it." "Well something came out in the tranny fluid".............................

__________________
Team Fee '86 Carrera 3.2 Coupe blk/blk, no wing
7&9x16s BFG GForce SS 205/55 & 245/50s, SW Chip, Maxspeed catbypass, B&B, Sachs Power Clutch, Turbo mounts, oil cooler scoop, RS door panels, Momo Prototipo, Rennline fully adj gas pedal & floorboard, RS replica dead pedal, Weltmeister yellow h/l lenses, factory short shift, custom speedo
32C #7
Old 12-12-2008, 06:41 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Virginia Rocks!
 
VaSteve's Avatar
 
Join Date: Oct 2003
Location: Just outside the beltway
Posts: 8,497
Quote:
Originally Posted by teamfee3 View Post
Also, while it's ther eI'll pull the sppedo and send it to Palo Alto and get it fixed and re-do the face by removing the KPH markings and numbers.

Why?


BTW, that's a nice looking car with those wheels. You need a chin spoiler to balance it out.
__________________
Rosewood 1983 911 SC Targa | Black 1990 944 S2 | White 1980 BMW R65 | Past: Crystal 1986 944 na
Guards Red is for the Unoriginal
Old 12-12-2008, 06:47 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
zugelassener benutzer
 
teamfee3's Avatar
 
Join Date: Dec 2008
Location: Towson MD
Posts: 545
Garage
oh no...........



"It is the piece of a roller bearing cage. It should be shifitng poorly or there should be a lot of noise." "Nope, it was fine" "Well the motor and tranny should come out"

OK....while it's out let's do the clutch and anything else recommended while it's apart. A quick call to the very helpful Pelican crew gets me a Sachs Power clutch (some Auto-X and track days expected), Sport/Turbo engine and tranny mounts (going to use it everyday I can) and a list of other $5 bits. It's Ralph again. "The flywheel has deep gouges in it and it can't be resurfaced. Another callto Pelican, something about a magnetic DME sensor so not lightened flywheel available.

BEFORE
Good news, all gears in perfect shape so the big bill was averted. Now what about a cat bypass with an O2 sensor, time to call Pelican.

BEFORE
__________________
Team Fee '86 Carrera 3.2 Coupe blk/blk, no wing
7&9x16s BFG GForce SS 205/55 & 245/50s, SW Chip, Maxspeed catbypass, B&B, Sachs Power Clutch, Turbo mounts, oil cooler scoop, RS door panels, Momo Prototipo, Rennline fully adj gas pedal & floorboard, RS replica dead pedal, Weltmeister yellow h/l lenses, factory short shift, custom speedo
32C #7
Old 12-12-2008, 06:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
zugelassener benutzer
 
teamfee3's Avatar
 
Join Date: Dec 2008
Location: Towson MD
Posts: 545
Garage
Quote:
Originally Posted by VaSteve View Post
Why?


BTW, that's a nice looking car with those wheels. You need a chin spoiler to balance it out.
I like the chin spoiler idea. What a modern retro look so cleaning up the speedo face will help and it's getting re-calibrated and rescreened for 180mph.
__________________
Team Fee '86 Carrera 3.2 Coupe blk/blk, no wing
7&9x16s BFG GForce SS 205/55 & 245/50s, SW Chip, Maxspeed catbypass, B&B, Sachs Power Clutch, Turbo mounts, oil cooler scoop, RS door panels, Momo Prototipo, Rennline fully adj gas pedal & floorboard, RS replica dead pedal, Weltmeister yellow h/l lenses, factory short shift, custom speedo
32C #7
Old 12-12-2008, 06:56 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
zugelassener benutzer
 
teamfee3's Avatar
 
Join Date: Dec 2008
Location: Towson MD
Posts: 545
Garage
a little more fun

When I ordered the Momo I saw a set of Weltmeister plastic yellow head light lenses. A good friend had some yellow lenses on his black 04 GT3 and it looked great. I can pull that off, I think. They arrive and it's a nightmare pain in the ass job. Ralph can do it.

A little, well a lot, yellow, but I'll run them until the MD State Police tell me otherwise.
__________________
Team Fee '86 Carrera 3.2 Coupe blk/blk, no wing
7&9x16s BFG GForce SS 205/55 & 245/50s, SW Chip, Maxspeed catbypass, B&B, Sachs Power Clutch, Turbo mounts, oil cooler scoop, RS door panels, Momo Prototipo, Rennline fully adj gas pedal & floorboard, RS replica dead pedal, Weltmeister yellow h/l lenses, factory short shift, custom speedo
32C #7
Old 12-12-2008, 07:00 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Home of the Whopper
 
Join Date: Mar 2001
Location: Rocky Top, TN
Posts: 6,824
Garage
You don't have a rear wing, I wouldn't put a chin spoiler on it.

I know it's a new car and you will be tempted to dump some money into it to customize it, but...

Have you noticed the trend in the long hoods? (Most) Everybody wants originality. In 5 - 10 years (or sooner) the SCs and Carreras will start becoming collectable and people will pay more for originality. If you do change anything keep the original!

BTW I am from Cockeysville. You need to take the car to Loch Raven and blast up and down Loch Raven Drive. Your car will love you for it!! Not exactly the tail of the dragon, but it helps a little.

__________________
1968 912 coupe
1971 911E Targa rustbucket
1972 914 1.7
1987 924S
Old 12-12-2008, 07:22 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Virginia Rocks!
 
VaSteve's Avatar
 
Join Date: Oct 2003
Location: Just outside the beltway
Posts: 8,497
Quote:
Originally Posted by teamfee3 View Post
I like the chin spoiler idea. What a modern retro look so cleaning up the speedo face will help and it's getting re-calibrated and rescreened for 180mph.
You'll never get there.




Quote:
Originally Posted by teamfee3 View Post
I can pull that off, I think. They arrive and it's a nightmare pain in the ass job. Ralph can do it.

There is a large DIY crowd in the DC area. You need to learn to turn a wrench yourself....you'll save a fortune.

Quote:
Originally Posted by BK911 View Post
You don't have a rear wing, I wouldn't put a chin spoiler on it.
Why? That's nonsense. I put a chin spoiler on my Targa, it made a huge improvement. It's not stable enough at 180 however.
__________________
Rosewood 1983 911 SC Targa | Black 1990 944 S2 | White 1980 BMW R65 | Past: Crystal 1986 944 na
Guards Red is for the Unoriginal
Old 12-12-2008, 07:29 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
zugelassener benutzer
 
teamfee3's Avatar
 
Join Date: Dec 2008
Location: Towson MD
Posts: 545
Garage
some fun was had first

I did get in one AutoX with the Cheapeake Region at the Police Training facility in Sykesville. Being used to 2002s and a 914 I spent a lot of time sideways (slow-ways). A ton of fun to get back into it and the club does an awesome job here.

My neighbors came in a TR6 and 71 Lotus Elan.

So what's next............
0. Paint spare headlight rings black.
1. It came with a great B&B exhaust so I'll pull the crappy aftermarket radio and create some iPod solution or find an original Monterey Digital Cass / Radio.

2. I also want to clean up the rear bumper and pull off the bumper overriders and install Hella tag lights to be legal.

3. A Recaro Pole Position for the drivers side is on the list.
4. I like the chin spoiler idea and maybe remove the driving lights and fill the holes.
5. The front bumper / hood rubber looks like crap and the side bellows look funky so the bumper will come off and get repainted.

I thought I would go RSR look until I saw this '87 on the forum

This car also has a B&B and Recaro Pole Position with Prototipo. I'll pass on the Carrera graphics but maybe some Martini stripes somewhere.
6. Maybe Rennline black drilled floor boards and silver drilled pedals but no dead pedal because of drilling into the fender well.
7. RS door panels in black vinyl with black or silver pulls
8. Maybe an RS duck tail - can't decide.
9. I really really want the hood mounted Cibie lights but can't decide if it's too cluttered or damn cool.

10. Pull off rocker trim and clean up the rockers.
11. Then I saw these cool drilled door handles.
__________________
Team Fee '86 Carrera 3.2 Coupe blk/blk, no wing
7&9x16s BFG GForce SS 205/55 & 245/50s, SW Chip, Maxspeed catbypass, B&B, Sachs Power Clutch, Turbo mounts, oil cooler scoop, RS door panels, Momo Prototipo, Rennline fully adj gas pedal & floorboard, RS replica dead pedal, Weltmeister yellow h/l lenses, factory short shift, custom speedo
32C #7
Old 12-12-2008, 07:34 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
Dixie Region R Gruppe
 
w21055's Avatar
 
Join Date: Oct 2006
Location: McDonough,GA
Posts: 1,365
Garage
Nice looking car. Black is so sexy!
__________________
Instagram @phillipkj4
1980 911 SC Backdated Viper Green
1992 Ferrari 348TB
Old 12-12-2008, 07:39 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)
Max Sluiter
 
Flieger's Avatar
 
Join Date: Mar 2006
Location: So Cal
Posts: 19,644
Garage
Why not go IROC RS? You would save major weight with fiberglass front and rear bumpers. And they look cool.
__________________
1971 911S, 2.7RS spec MFI engine, suspension mods, lightened
Suspension by Rebel Racing, Serviced by TLG Auto, Brakes by PMB Performance
Old 12-12-2008, 07:43 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)
zugelassener benutzer
 
teamfee3's Avatar
 
Join Date: Dec 2008
Location: Towson MD
Posts: 545
Garage
Quote:
Originally Posted by VaSteve View Post
You'll never get there.

A little fun for the uninitiated to see and wonder

There is a large DIY crowd in the DC area. You need to learn to turn a wrench yourself....you'll save a fortune.

No garage (breakfast room now) and no time (three kids, Sales Manager at one of the biggest and best BMW Motorcycle Dealers in the US - Bob's BMW)

Why? That's nonsense. I put a chin spoiler on my Targa, it made a huge improvement. It's not stable enough at 180 however.
I think I like the chin spoiler.
__________________
Team Fee '86 Carrera 3.2 Coupe blk/blk, no wing
7&9x16s BFG GForce SS 205/55 & 245/50s, SW Chip, Maxspeed catbypass, B&B, Sachs Power Clutch, Turbo mounts, oil cooler scoop, RS door panels, Momo Prototipo, Rennline fully adj gas pedal & floorboard, RS replica dead pedal, Weltmeister yellow h/l lenses, factory short shift, custom speedo
32C #7
Old 12-12-2008, 07:47 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)
zugelassener benutzer
 
teamfee3's Avatar
 
Join Date: Dec 2008
Location: Towson MD
Posts: 545
Garage
Quote:
Originally Posted by Flieger View Post
Why not go IROC RS? You would save major weight with fiberglass front and rear bumpers. And they look cool.
Once I get the front bumper off I might go that route. It was my original plan, lighter, cleaner.
__________________
Team Fee '86 Carrera 3.2 Coupe blk/blk, no wing
7&9x16s BFG GForce SS 205/55 & 245/50s, SW Chip, Maxspeed catbypass, B&B, Sachs Power Clutch, Turbo mounts, oil cooler scoop, RS door panels, Momo Prototipo, Rennline fully adj gas pedal & floorboard, RS replica dead pedal, Weltmeister yellow h/l lenses, factory short shift, custom speedo
32C #7
Old 12-12-2008, 07:48 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)
 
Virginia Rocks!
 
VaSteve's Avatar
 
Join Date: Oct 2003
Location: Just outside the beltway
Posts: 8,497
Quote:
Originally Posted by teamfee3 View Post
6. Maybe Rennline black drilled floor boards and silver drilled pedals but no dead pedal because of drilling into the fender well.

Are you sure it goes all the way through? I put one in my Targa and I love it. I wish I had done it long before.

If you're going to do all that other stuff, just POR 15 the holes.
__________________
Rosewood 1983 911 SC Targa | Black 1990 944 S2 | White 1980 BMW R65 | Past: Crystal 1986 944 na
Guards Red is for the Unoriginal
Old 12-12-2008, 08:04 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)
zugelassener benutzer
 
teamfee3's Avatar
 
Join Date: Dec 2008
Location: Towson MD
Posts: 545
Garage
dumb stuff decals and badges




__________________
Team Fee '86 Carrera 3.2 Coupe blk/blk, no wing
7&9x16s BFG GForce SS 205/55 & 245/50s, SW Chip, Maxspeed catbypass, B&B, Sachs Power Clutch, Turbo mounts, oil cooler scoop, RS door panels, Momo Prototipo, Rennline fully adj gas pedal & floorboard, RS replica dead pedal, Weltmeister yellow h/l lenses, factory short shift, custom speedo
32C #7
Old 12-12-2008, 09:08 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)
zugelassener benutzer
 
teamfee3's Avatar
 
Join Date: Dec 2008
Location: Towson MD
Posts: 545
Garage
I need feedback on the Bursch cat bypass with O2 sensor. Good product? Too loud (attracts cops)? Only $169 at Pelican.
__________________
Team Fee '86 Carrera 3.2 Coupe blk/blk, no wing
7&9x16s BFG GForce SS 205/55 & 245/50s, SW Chip, Maxspeed catbypass, B&B, Sachs Power Clutch, Turbo mounts, oil cooler scoop, RS door panels, Momo Prototipo, Rennline fully adj gas pedal & floorboard, RS replica dead pedal, Weltmeister yellow h/l lenses, factory short shift, custom speedo
32C #7
Old 12-12-2008, 09:11 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #15 (permalink)
Registered
 
jwash's Avatar
 
Join Date: Jul 2007
Location: Marin, CA
Posts: 123
Garage
bag on the cat bypass and get SSIs instead. The sound combined with the right exhaust is amazing.
__________________
1984 3.2 targa
Old 12-12-2008, 10:05 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)
Registered
 
Nickatnyt's Avatar
 
Join Date: Jul 2005
Location: Spokane, WA
Posts: 490
Drilled door handles scream 'ricer'.
__________________
1982 SC...Guards Red + Linen
Old 12-12-2008, 11:42 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)
Registered
 
Ducst4's Avatar
 
Join Date: Mar 2006
Posts: 122
How does the B & B exhaust sound compared to others
Do you have any sound clips?
__________________
_______________
Ducst4
1989 911 3.2
Old 12-13-2008, 05:21 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)
Dixie Region R Gruppe
 
w21055's Avatar
 
Join Date: Oct 2006
Location: McDonough,GA
Posts: 1,365
Garage
Where did you get that 69-71 World champion Decal?
__________________
Instagram @phillipkj4
1980 911 SC Backdated Viper Green
1992 Ferrari 348TB
Old 12-13-2008, 05:37 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #19 (permalink)
Home of the Whopper
 
Join Date: Mar 2001
Location: Rocky Top, TN
Posts: 6,824
Garage
Quote:
Originally Posted by Nickatnyt View Post
Drilled door handles scream 'ricer'.
It's a german car, so I believe the correct term is "Sauerkraut". But it matches the rest of the stuff he wants to do with HIS car, so.... to each their own. Too bad, it was a nice looking car.

__________________
1968 912 coupe
1971 911E Targa rustbucket
1972 914 1.7
1987 924S
Old 12-13-2008, 07:33 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #20 (permalink)
Reply


 


All times are GMT -8. The time now is 01:17 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.