Torque setting for lug nuts?

[mclmk8d]

What are the torque settings of lug nuts? I did a search and found lots of interesting info, but none had the torque settings. This is for 16X7 and 16X8 Fuchs wheels.

[Oh Haha]

94 ft/ lbs

[intakexhaust]

Info is in the owners manual.

[masraum]

Where's the pic of that Lugnut torque T-shirt when you need it?

[Mitch Leland]

I just round it off at 90 ft.lbs... As you're probably aware it's better to crisscross the tightening patten, rather than just tighten in a CW or CCW pattern. A dab of anti seize is also recommended.

[DRACO A5OG]

+1 = 94

[mclmk8d]

Thanks guys...I appreciate it.
@intakeexhaust: don't have the manual yet; the car is arriving tomorrow from PA.

[GrantG]

I was under the impression that it's 96ft-lbs or 130Nm for all Porsches (aside from center-locks).

[Steve@Rennsport]

92-94 lbs-ft since 1967,...

[Canada Kev]

And those torque specs assume that the threads are lubricated, as Mitch suggested.

[Bob Kontak]

95.9 ft lbs based on 130 Nm
and/or
94 ft lbs based on 13 kpm

SC Tech Spec book.

[RWebb]

threads AND convex face of the lug nut should be lubricated with a thing smear on anti-sieze - P AG also specs a particular one...

[Canada Kev]

Originally Posted by RWebb

threads AND convex face of the lug nut should be lubricated with a thing smear on anti-sieze - P AG also specs a particular one...

Yes, lube on all contact surfaces. I guess I should have been more specific.