Where can i find the 20 degree brake caliper piston alignment tool...??

[911 tweaks]

thx all... pm sent to vash...

[RWebb]

I wanna see a pic of the vash/OCD one...

[vash]

Ok it was much less impressive when I dug it out of my toolbox. At least the 20 is perfect. I used drafting tools to make it.

[plymouthcolt]

Originally Posted by 911 tweaks

thx guys...I found out that Ed M. the coupler guy made some of these in the past...I am awaiting to hear back from him to see if he has any more so I can get one...

I made one out of cardboard using a protractor leftover from grade school.

[Scott R]

Baum tool sells it, it's $19 and was a nice addition to my specialty tool collection. I do enough calipers that paper or cardboard would be a constant pain.

Tool Listing

1023/1

[hcoles]

Originally Posted by Quicksilver

Tin snips and a chunk of sheet metal.
To turn pistons I use a set of heavy duty snap ring pliers used on transmissions.

good idea, any info. on make/model? I googled around, there are many out there but I'm not sure which will work well reaching in and grabbing the rusty ID. Thanks.

[RWebb]

well, if it rusty, then you need to rebuild the whole shootin' match