|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2001
Location: Thunder Bay, ON
Posts: 4,551
|
Bead Blasting Front Struts
The following link goes to an auction for a pair of Boge strut housings that have been bead blasted
Is the fact they blasted the machined surface of the spindle a problem? I have always beem meticulous in the taping/covering these areas prior to blasting in the past. Thanks Andrew M 1970 911T
__________________
1970 911E - track / weekend car 1970 911S - under restoration 1986 930 Slant Nose - fun car |
||
01-02-2003, 08:11 PM
|
|
|
Registered
Join Date: Jan 2002
Location: Long Beach CA, the sewer by the sea.
Posts: 37,708
|
If they were truely blasted with glass beads, there would be no problem, IMHO. Sandblasting would not do the spindle threads any good, that I'm sure of. While I agree that blasting the machined surfaces of the spindles was unecessary, it most likely didn't do any harm either.
|
||
|
01-02-2003, 08:26 PM
|
|
