|
|
|
|
| Author |
|
|
Registered
|
Can anyone ID this missing under dash wiring terminal plug
I am cleaning out some old wiring from under the dash to my Rat Rod, and wanting to get the hazard switch hooked up. The factory harness has not been missing any wires to date, but I cannot find a lot of wires that should go to the hazard switch. While under the dash I notice this plug missing. Hmmmm...
For perspective that empty plug is the the left and above the main row of plugs, and the smaller HVAC hose you see feeds the dash vent on the drivers side, while the larger HVAC hose on the far right of the pic runs from the dash down and into the drivers side door sill (its heat obviously). Any clue what that plug feeds? 
__________________
Chris - Insta @chrisjbolton 1975 911s Insta: @911ratrod steel wide body, 3.6 conversion 1989 911 Carrera 25th Anniversary Ed (5th from the last car to ever leave the original Porsche factory assembly line) 2001 996 Turbo - ~54k miles |
||
03-19-2017, 09:56 AM
|
|
|
Registered
Join Date: Apr 2012
Location: Edmonton
Posts: 419
|
I'm guessing you're missing thharness between the hazard switch and body
part # 911.612.014.30 |
||
|
03-19-2017, 04:34 PM
|
|
|
Registered
|
Anyone else have a guess or are we SURE its that plug? That part is NLA...hmm
__________________
Chris - Insta @chrisjbolton 1975 911s Insta: @911ratrod steel wide body, 3.6 conversion 1989 911 Carrera 25th Anniversary Ed (5th from the last car to ever leave the original Porsche factory assembly line) 2001 996 Turbo - ~54k miles |
||
|
03-20-2017, 04:43 AM
|
|
|
Registered
Join Date: Sep 2002
Location: Lake Tapps, WA
Posts: 3,070
|
Are all your switches present and have wires coming out of them going to their respective plugs? IIRC, those two plugs are for the headlight and flasher switches.
__________________
'67 911S '69 911S, '70 911ST '73 911T Targa Signal Yellow '78 911SC backdate |
||
|
03-20-2017, 04:58 AM
|
|
|
Registered
|
Did not doubt jrbennett......just looking for a larger sample than 1. Thanks cnielsen...now I need to find one, since its NLA. Kroon maybe. hmm...
__________________
Chris - Insta @chrisjbolton 1975 911s Insta: @911ratrod steel wide body, 3.6 conversion 1989 911 Carrera 25th Anniversary Ed (5th from the last car to ever leave the original Porsche factory assembly line) 2001 996 Turbo - ~54k miles |
||
|
03-20-2017, 06:12 AM
|
|
|
ROW '78 911 Targa
|
I could cast/build you a new one, what year do you need?
(If you are sure that is what is missing) Or just post a WTB in the classifieds.
__________________
Dennis Euro 1978 SC Targa, SSI's, Dansk 2/1, PMO ITBs, Electric A/C Need a New Wiring Harness? PM or e-mail me. Search for "harnesses" in the classifieds. Last edited by timmy2; 03-20-2017 at 08:34 AM.. |
||
|
03-20-2017, 06:52 AM
|
|
|
|
Kroon Wire Harnesses
|
We can deliver all years directly from stock. Depending on the year of your car the harness might also need a resistor. Have a look at our website www.kroonwireharnesses.com or just contact us by email at info@kroonwireharnesses.com
__________________
Kroon Wire Harnesses Specialized in Classic Porsche electrics www.kroonwireharnesses.com Check also our Facebookpage: https://www.facebook.com/kroon.wireharnesses Last edited by gerakroo; 03-23-2017 at 11:53 AM.. |
||
|
03-23-2017, 10:52 AM
|
|
|
Insert Tag Line HERE.....
|
one of those plugs feeds the turn signals/lights and the other one feeds the wipers. They both come directly from the switches on the steering column so one of those two is missing.
__________________
Marc |
||
|
03-23-2017, 11:53 PM
|
|
|
Registered
|
Thank you EVERYONE! I scavenged the harness from a 1986 Targa near my house.
 I plugged it in and replaced the flasher relay but no joy. I have not had a chance yet to R&R the issues (check the relationship, etc. I do know the '86 harness has a resistor in it. The switch is new, so that and the relay are not the issue. I will report back. Any clue if a 75 needs the resistor found in the 86?
__________________
Chris - Insta @chrisjbolton 1975 911s Insta: @911ratrod steel wide body, 3.6 conversion 1989 911 Carrera 25th Anniversary Ed (5th from the last car to ever leave the original Porsche factory assembly line) 2001 996 Turbo - ~54k miles |
||
|
03-24-2017, 06:32 AM
|
|
|
ROW '78 911 Targa
|
'75 schematic shows N6 resistor.
__________________
Dennis Euro 1978 SC Targa, SSI's, Dansk 2/1, PMO ITBs, Electric A/C Need a New Wiring Harness? PM or e-mail me. Search for "harnesses" in the classifieds. |
||
|
03-24-2017, 07:12 AM
|
|
|
ROW '78 911 Targa
|
Link to '75 schematics
https://www.dropbox.com/sh/oswepkzym8agnt6/AAAR8QHZ8BO3BbkSNqVwvL2Ma?dl=0
__________________
Dennis Euro 1978 SC Targa, SSI's, Dansk 2/1, PMO ITBs, Electric A/C Need a New Wiring Harness? PM or e-mail me. Search for "harnesses" in the classifieds. |
||
|
03-24-2017, 07:15 AM
|
|
911S Rat Rod
Anni
BatTurbo
Heinz
Carrera 3.2
928
928S 1984
1975 Ferrari Dino 208 GT4
78 Porsche 911 Turbo
1972 porsche 72 rsr clone
1995 porsche 993
1995 porsche 993
1990 porsche C2 911
1966 porsche 911
1984 Porsche 911
2003 Porsche 996
