|
|
|
|
| Author |
|
|
Registered
|
Inner and outer
Ok, with the engine out, which mark do I align up TDC? Inner, next to the engine, or outer, not next to the engine? The PDF manual sez align the marks on the flywheel to the cast mark on the block, but the picture they have shows the outer mark on the flywheel, but it isn't lined up with the mark! I have an automatic tranny flywheel, and it's different than the 5 sp. flywheel. The automatic has two levels, with marks on both.
__________________
*Disclaimer: The person above is actually dumber than he appears. my web site Torque values maintainance and repairs lots of my rebuild pics weights and measurements '84 944 auto/ps/ac/cc '86 951 Providing ignorance one post at a time. |
||
01-24-2003, 07:04 PM
|
|
|
Registered
|
Hmmm,i dont know...
__________________
Texas hosts the 928 Owner’s Club OCIC in 2009 www.928ocicdfw09.com 1980 928 5 speed and a few mods..........  928 OC member PCA member |
||
|
01-24-2003, 09:12 PM
|
|
|
Registered
|
bump!
__________________
*Disclaimer: The person above is actually dumber than he appears. my web site Torque values maintainance and repairs lots of my rebuild pics weights and measurements '84 944 auto/ps/ac/cc '86 951 Providing ignorance one post at a time. |
||
|
01-25-2003, 08:02 AM
|
|
|
Registered
Join Date: Feb 2001
Location: Viera FL
Posts: 5,642
|
Pictures man, post some pictures!
AFJuvat
__________________
Es geht nicht darum wie schnell man faehrt, sondern wie gut man schnell fahren kann. Ihr Brunnen der nutzlosen Porsche Information |
||
|
01-25-2003, 08:07 AM
|
|
|
Registered
|
My digital isn't working and I'd have to take the flywheel off of the motor and bring it in. You've never had to find #1 TDC on an automatic tranny 944?
__________________
*Disclaimer: The person above is actually dumber than he appears. my web site Torque values maintainance and repairs lots of my rebuild pics weights and measurements '84 944 auto/ps/ac/cc '86 951 Providing ignorance one post at a time. |
||
|
01-25-2003, 09:42 AM
|
|
|
Registered
|
Ok, I just looked at both flywheels, and the only difference is that the autotranny one has the 4 thingys for the flex disc and the area closest to the motor is steped down about a half an inch. The marks are the same on both, in the same places.
__________________
*Disclaimer: The person above is actually dumber than he appears. my web site Torque values maintainance and repairs lots of my rebuild pics weights and measurements '84 944 auto/ps/ac/cc '86 951 Providing ignorance one post at a time. |
||
|
01-25-2003, 09:51 AM
|
|
|
|
Registered
|
NM, I used a screwdriver and when it was TDC, I looked at which mark was the closest! Motor's together!!!!!!!!!!!!!Belts are tensioned!!!!!!!!!!!!!!Cherrypicker on the ready!!!!!!!!!!!!Let's get this baby to bed!
__________________
*Disclaimer: The person above is actually dumber than he appears. my web site Torque values maintainance and repairs lots of my rebuild pics weights and measurements '84 944 auto/ps/ac/cc '86 951 Providing ignorance one post at a time. |
||
|
01-25-2003, 11:45 AM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
'84 Porsche 944 2.5L
