Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   Off Topic Discussions (http://forums.pelicanparts.com/forumdisplay.php?f=31)
-   -   2020 New Random Pics (http://forums.pelicanparts.com/showthread.php?t=1065287)

GH85Carrera 08-26-2023 06:28 AM

http://forums.pelicanparts.com/uploa...1693059868.jpg

http://forums.pelicanparts.com/uploa...1693059868.jpg
Ran when parked, some minor rust. No low ball offers!

http://forums.pelicanparts.com/uploa...1693059868.jpg
IWO JIMA.
Original caption: JAPANESE DUGOUT -- Cpl. Emil Morris Jr of Sedalia, Mo., stands ready with camera at entrance to former Japanese observation post on Iwo Jima. Ceiling is constructed of salvaged Japanese plane wings. Corridor and stairs lead down to a buried Japanese bomber fuselage.

http://forums.pelicanparts.com/uploa...1693059868.jpg
IWO JIMA.
Original caption: A Bulldozer moves the dirt at the first bend on the road to the summit of Mt. Suribachi on Iwo Jima, Bonin Islands. The construction of the road was started by the 32nd Marine SeaBees about fourteen days after D-Day (19 February 1945) and on the first day a bulldozer reached the top of the mountain. Six days later a two lane road was roughly finished, Since 1891 when the Japanese started development of the island they failed to or were unable to construct a road of any kind for vehicular passage to the summit. 10 March 1945. (N.A.)

http://forums.pelicanparts.com/uploa...1693059868.jpg

http://forums.pelicanparts.com/uploa...1693059868.jpg
Punk of the turtle world: the Mary River turtle. This exceptional animal breathes underwater using specialized glands in its reproductive organs, allowing it to remain submerged for up to 72 hours – an unusual feature in a reptile, which earned it the name "bum-breather".

masraum 08-26-2023 09:27 AM

Quote:

Originally Posted by GH85Carrera (Post 12076000)
http://forums.pelicanparts.com/uploa...1693059868.jpg
Ran when parked, some minor rust. No low ball offers!

buried at the beach?
https://live.staticflickr.com/7005/6...3ab6fc3c_b.jpg

Quote:

http://forums.pelicanparts.com/uploa...1693059868.jpg
IWO JIMA.
Original caption: A Bulldozer moves the dirt at the first bend on the road to the summit of Mt. Suribachi on Iwo Jima, Bonin Islands. The construction of the road was started by the 32nd Marine SeaBees about fourteen days after D-Day (19 February 1945) and on the first day a bulldozer reached the top of the mountain. Six days later a two lane road was roughly finished, Since 1891 when the Japanese started development of the island they failed to or were unable to construct a road of any kind for vehicular passage to the summit. 10 March 1945. (N.A.)
Not that we and the Seabees aren't awesome, but had the Japanese tried to build a road to the summit?
https://cdn.outsideonline.com/wp-con...09/Manaslu.jpg

Quote:

http://forums.pelicanparts.com/uploa...1693059868.jpg
Punk of the turtle world: the Mary River turtle. This exceptional animal breathes underwater using specialized glands in its reproductive organs, allowing it to remain submerged for up to 72 hours – an unusual feature in a reptile, which earned it the name "bum-breather".
I'm no expert, but I think breathing through your reproductive organs is just unusual, whether we're talking about reptiles or not. I'm glad that I don't breath through my reproductive organs for so many reasons.

https://exrja3g2wej.exactdn.com/wp-c...&lossy=1&ssl=1

Steve Carlton 08-26-2023 09:39 AM

^ It gets hard to breathe when looking at the Most Beautiful Women thread. An inhaler helps.

http://forums.pelicanparts.com/uploa...1693071543.jpg

GH85Carrera 08-26-2023 10:07 AM

http://forums.pelicanparts.com/uploa...1693073062.jpg

http://forums.pelicanparts.com/uploa...1693073062.jpg

http://forums.pelicanparts.com/uploa...1693073062.jpg
Yuck. That is one messed up foot! That poor lady had her foot bound all her life. I can't imagine the pain.

http://forums.pelicanparts.com/uploa...1693073062.jpg
The fasces, a bound bundle of sticks sometimes with a projecting axe is a symbol that goes back to the ancient Etruscans. The ancient Romans adopted it as a symbol of power for appointed magistrates. Today it is still used as a symbol of power and collective governance.

http://forums.pelicanparts.com/uploa...1693073062.jpg

http://forums.pelicanparts.com/uploa...1693073062.jpg

Steve Carlton 08-26-2023 03:42 PM

http://forums.pelicanparts.com/uploa...1693093289.jpg

http://forums.pelicanparts.com/uploa...1693093309.jpg

http://forums.pelicanparts.com/uploa...1693093337.jpg

http://forums.pelicanparts.com/uploa...1693093349.jpg

rcooled 08-26-2023 04:02 PM

http://forums.pelicanparts.com/uploa...1693094529.jpg

A930Rocket 08-26-2023 07:06 PM

http://forums.pelicanparts.com/uploa...1693105547.jpg

Racerbvd 08-26-2023 08:16 PM

http://forums.pelicanparts.com/uploa...1693109703.jpg
http://forums.pelicanparts.com/uploa...1693109703.jpg
http://forums.pelicanparts.com/uploa...1693109703.jpg
http://forums.pelicanparts.com/uploa...1693109703.jpg
http://forums.pelicanparts.com/uploa...1693109703.jpg
http://forums.pelicanparts.com/uploa...1693109703.jpg
http://forums.pelicanparts.com/uploa...1693109703.jpg
http://forums.pelicanparts.com/uploa...1693109703.jpg
http://forums.pelicanparts.com/uploa...1693109703.jpg
http://forums.pelicanparts.com/uploa...1693109703.jpg

A930Rocket 08-26-2023 08:56 PM

http://forums.pelicanparts.com/uploa...1693112181.jpg



http://forums.pelicanparts.com/uploa...1693112181.jpg

Seahawk 08-27-2023 04:51 AM

^^^ Love it.

http://forums.pelicanparts.com/uploa...1693140636.jpg

VINMAN 08-27-2023 05:14 AM

Quote:

Originally Posted by masraum (Post 12076096)
I'm no expert, but I think breathing through your reproductive organs is just unusual, whether we're talking about reptiles or not. I'm glad that I don't breath through my reproductive organs for so many reasons.

Well.. I have have been told that I think through mine at times..


http://forums.pelicanparts.com/uploa...1693142049.jpg

masraum 08-27-2023 05:36 AM

Quote:

Originally Posted by VINMAN (Post 12076518)
Well.. I have have been told that I think through mine at times..


http://forums.pelicanparts.com/uploa...1693142049.jpg

LOL! The main with 2 brains! Wait, I think that's many/most of us at times.

https://www.eightieskids.com/wp-cont...urnerToday.jpg

GH85Carrera 08-27-2023 05:37 AM

http://forums.pelicanparts.com/uploa...1693143373.jpg

http://forums.pelicanparts.com/uploa...1693143373.jpg

http://forums.pelicanparts.com/uploa...1693143373.jpg

http://forums.pelicanparts.com/uploa...1693143373.jpg

http://forums.pelicanparts.com/uploa...1693143373.jpg

http://forums.pelicanparts.com/uploa...1693143373.jpg

Racerbvd 08-27-2023 07:09 AM

http://forums.pelicanparts.com/uploa...1693148943.jpg

http://forums.pelicanparts.com/uploa...1693148943.jpg
http://forums.pelicanparts.com/uploa...1693148943.jpg

flatbutt 08-27-2023 09:48 AM

I tried to resize the vid but this is what I got :confused:

http://forums.pelicanparts.com/uploa...1693158452.gif
http://forums.pelicanparts.com/uploa...1693158469.gif
http://forums.pelicanparts.com/uploa...1693158481.gif

GH85Carrera 08-27-2023 09:58 AM

http://forums.pelicanparts.com/uploa...1693159046.jpg

http://forums.pelicanparts.com/uploa...1693159046.jpg

http://forums.pelicanparts.com/uploa...1693159046.jpg
Not my receipt!!!!

http://forums.pelicanparts.com/uploa...1693159046.jpg

http://forums.pelicanparts.com/uploa...1693159046.jpg
BALIKPAPAN, BORNEO, N.E.I.
Original caption: Filling up a gas truck with aviation gasoline at the Sepingang Airstrip gas dump. Balikpapan Operation, 1-31 July 1945. Balikpapan, Borneo, N.E.I., 16 July 1945. (N.A.)

http://forums.pelicanparts.com/uploa...1693159046.jpg

masraum 08-27-2023 10:15 AM

Quote:

Originally Posted by GH85Carrera (Post 12076700)

Is it just me, or is this a horrible photoshop? I'm pretty sure a ship's propeller like that would absolutely shred a sailboat. Lots of stuff has been added to this image.

Gotta be one of those "buy here, pay here" car lots! LMAO!
LOL, is this receipt in Lira?

https://www.biographic.com/wp-conten...1_homepage.jpg

https://www.man-es.com/images/defaul...rsn=c7046f71_0

https://i.dailymail.co.uk/1s/2022/12...0932202730.jpg


https://media.cnn.com/api/v1/images/...0,c_fill/h_778

https://news.okstate.edu/articles/ag...der_banner.jpg

https://i.ytimg.com/vi/Q8J_lN917Lc/maxresdefault.jpg

masraum 08-27-2023 10:25 AM

https://pyxis.nymag.com/v1/imgs/12f/...quare.w700.jpg

https://s.hdnux.com/photos/32/43/22/...8/4/1200x0.jpg

https://i.pinimg.com/736x/0b/06/f4/0...d02e139142.jpg

https://i.pinimg.com/1200x/32/f8/b1/...da0dc13757.jpg

https://pbs.twimg.com/media/FCrP6YIXIAIWbDQ.jpg

https://media.tenor.com/OaV6Bn2RFCYA...ctor-sleep.gif

https://static.wikia.nocookie.net/th...20170810030337

https://images.mubicdn.net/images/ca...image-w856.jpg

https://static1.purepeople.com/artic...nd-580x0-2.jpg

GH85Carrera 08-27-2023 12:15 PM

http://forums.pelicanparts.com/uploa...1693167245.jpg

http://forums.pelicanparts.com/uploa...1693167245.jpg

http://forums.pelicanparts.com/uploa...1693167245.jpg

http://forums.pelicanparts.com/uploa...1693167245.jpg

http://forums.pelicanparts.com/uploa...1693167245.jpg

http://forums.pelicanparts.com/uploa...1693167245.jpg

Por_sha911 08-27-2023 03:32 PM

This was a real newspaper ad many decades ago
http://forums.pelicanparts.com/uploa...1693178994.jpg

GH85Carrera 08-27-2023 04:13 PM

http://forums.pelicanparts.com/uploa...1693181535.jpg

http://forums.pelicanparts.com/uploa...1693181535.jpg
Even at 200-250 psig, crews had to keep alert to avoid catastrophes. Here's the C&O's T-1 #3020 near Chillicothe, OH in 1943...

http://forums.pelicanparts.com/uploa...1693181535.jpg

http://forums.pelicanparts.com/uploa...1693181535.jpg

http://forums.pelicanparts.com/uploa...1693181535.jpg

http://forums.pelicanparts.com/uploa...1693181535.jpg

Steve Carlton 08-27-2023 04:40 PM

http://forums.pelicanparts.com/uploa...1693183219.jpg

GH85Carrera 08-27-2023 07:00 PM

http://forums.pelicanparts.com/uploa...1693191525.jpg

http://forums.pelicanparts.com/uploa...1693191525.jpg
Around 32,000 years ago, an arctic ground squirrel ate parts of a plant, silene stenophylla, including its seed. The squirrel was digesting it when its life ended.
Its body was recovered from permafrost and examined. Scientists germinated this plant seed. This silene stenophylla just bloomed.
It is 32,000 years old.
The strength, the vitality and stamina of living things — of life itself — is incredible.

http://forums.pelicanparts.com/uploa...1693191525.jpg

http://forums.pelicanparts.com/uploa...1693191525.jpg
PEARL HARBOR.
Original caption. Japanese Strategy That Failed. Torpedoman Second Class holds this device, made of wood, bamboo, glass and tincans, in the shape of a submarine’s periscope was found in the sea near Pearl Harbor. It evidently was intended to attract fire from U.S. patrols and thus waste bombs. (National Museum of U.S. Navy.)

http://forums.pelicanparts.com/uploa...1693191525.jpg

http://forums.pelicanparts.com/uploa...1693191525.jpg
IWO JIMA.
Original caption. After one has ascended Mt. Suribachi via the highway built by the 31st SeaBees he has an excellent view of 7th Air Force Installations on Iwo Jima, Bonin Islands, Far in the distance is the No. 1 runway. 10 April 1945. (N.A.)

craigster59 08-28-2023 08:05 AM

http://forums.pelicanparts.com/uploa...1693238700.jpg

GH85Carrera 08-28-2023 08:13 AM

http://forums.pelicanparts.com/uploa...1693239150.jpg

http://forums.pelicanparts.com/uploa...1693239150.jpg

http://forums.pelicanparts.com/uploa...1693239150.jpg

http://forums.pelicanparts.com/uploa...1693239150.jpg
Dinosaurs were big and some prehistoric animals were huge, but the blue whale is not only the largest animal in existence, it is also the largest known animal to have ever existed.

http://forums.pelicanparts.com/uploa...1693239150.jpg

http://forums.pelicanparts.com/uploa...1693239150.jpg

daepp 08-28-2023 11:01 AM

Quote:

Originally Posted by masraum (Post 12068844)

Ok, I'm the idiot in the room, what's that "nib" for on top of the saw blade?


Random:

http://forums.pelicanparts.com/uploa...1693249200.jpg

Crowbob 08-28-2023 11:13 AM

To scribe the piece to be cut instead of sawing through your thumbnail. Invert the saw, using your thumb as a backstop for the saw, make a notch with the nib, right the saw, make the cut, invent a new swear word.

GH85Carrera 08-28-2023 11:14 AM

http://forums.pelicanparts.com/uploa...1693249919.jpg
HOW TO DRIVE IN ATLANTA:
1. You must first learn to pronounce the city name, Atlana. Old-timers are still allowed to call it Alana.
2. The morning rush hour is from 5:00 am to noon. The evening rush hour is from noon to 7:00 pm. Friday's rush hour starts on Thursday morning.
3. The minimum acceptable speed on I-285 is 80 mph. On I-75 and I-85, your speed is expected to at least match the highway number. Anything less is considered 'Wussy'.
4. Forget the traffic rules you learned elsewhere. Atlanta has its own version of traffic rules. For example, Ferraris and Lamborghinis owned by sports stars go first at a four-way stop. Cars/trucks with the loudest muffler go second. The trucks with the biggest tires go third. The HOV lanes are really designed just for the slow Floridians passing through who are used to hogging the left lane everywhere.
5. If you actually stop at a yellow light or stop sign, you will be rear ended, cussed out, and possibly shot. Unless there is a police car nearby.
6. Never honk at anyone. Ever. Seriously. It's another offense that can get you shot.
7. Road construction is permanent and continuous. Detour barrels are moved around for your entertainment pleasure during the middle of the night to make the next day's driving a bit more exciting. Generally, city roads other than the main streets have more potholes and bumps (usually speed bumps) than most dirt roads in the countryside.
8. Watch carefully for road hazards such as drunks, ladders, possums, skunks, dogs, barrels, cones, furniture, cats, mattresses, shredded tires, squirrels, rabbits, and crows.
9. Be aware that spelling of street names may change from block to block, e.g., Clairmont, Claremont, Clairmonte.
10. If someone actually has their turn signal on, wave them to the shoulder immediately to let them know it has been “accidentally activated”.
11. If you are in the left lane and only driving 75 in a 55-65 mph zone, k, e.g., you are considered a road hazard and will be “flipped off” accordingly. If you return the flip, you'll be shot.
MOST IMPORTANT: If you get LOST, Look for a road named PEACHTREE... Then you are somewhere in Atlanta.

http://forums.pelicanparts.com/uploa...1693249919.jpg

http://forums.pelicanparts.com/uploa...1693249919.jpg

http://forums.pelicanparts.com/uploa...1693249919.jpg
Robert and Jane McEuin on their farm in front of their cabin near Choctaw City, Oklahoma Territory. c.1895.

http://forums.pelicanparts.com/uploa...1693249919.jpg

http://forums.pelicanparts.com/uploa...1693249919.jpg

Zeke 08-28-2023 11:49 AM

Quote:

Originally Posted by Crowbob (Post 12077471)
To scribe the piece to be cut instead of sawing through your thumbnail. Invert the saw, using your thumb as a backstop for the saw, make a notch with the nib, right the saw, make the cut, invent a new swear word.

I have looked for the reason for the nib and the overwhelming consensus is no one knows. It's been there since saws were made on some.

If you do as you say on a cross cut, it will rip the corner off the board giving you the last thing you want to see. On a rip it might not make any difference but you mostly see nibs on crosscut saws. At least that has been my experience.

I have a small collection of old saws and I've sharpened and set a few with mixed results. Nothing beats a machine but old timers had to sharpen on the job. I suspect as with anything, some did it better than others.

I worked as a super for a 2nd gen contractor whose father was a Swedish carpenter from the old country. I worked with another Swedish carpenter old enough to be my dad. These guys taught me a lot.

One of the great stories was about hand saw sharpening. As it was told, once done with the saw, the carpenter would angle the saw down say 30º with the teeth up. He then placed a needle at the handle end and it was expected to slide down the row of teeth between the sets and sharpening angles. Each tooth is sharpened at 2 angles WRT to the blade and then set.

Running the outside of the teeth gently along a stone one time produced perfection.

daepp 08-28-2023 12:17 PM

QUOTE=Crowbob;12077471]To scribe the piece to be cut instead of sawing through your thumbnail. Invert the saw, using your thumb as a backstop for the saw, make a notch with the nib, right the saw, make the cut, invent a new swear word.[/QUOTE]

Quote:

Originally Posted by Zeke (Post 12077507)
I have looked for the reason for the nib and the overwhelming consensus is no one knows. It's been there since saws were made on some.

If you do as you say on a cross cut, it will rip the corner off the board giving you the last thing you want to see. On a rip it might not make any difference but you mostly see nibs on crosscut saws. At least that has been my experience.

I have a small collection of old saws and I've sharpened and set a few with mixed results. Nothing beats a machine but old timers had to sharpen on the job. I suspect as with anything, some did it better than others.

I worked as a super for a 2nd gen contractor whose father was a Swedish carpenter from the old country. I worked with another Swedish carpenter old enough to be my dad. These guys taught me a lot.

One of the great stories was about hand saw sharpening. As it was told, once done with the saw, the carpenter would angle the saw down say 30º with the teeth up. He then placed a needle at the handle end and it was expected to slide down the row of teeth between the sets and sharpening angles. Each tooth is sharpened at 2 angles WRT to the blade and then set.

Running the outside of the teeth gently along a stone one time produced perfection.

Thanks guys. All very interesting!



Random:

http://forums.pelicanparts.com/uploa...1693253807.jpg

GH85Carrera 08-28-2023 12:39 PM

http://forums.pelicanparts.com/uploa...1693254976.jpg
That is a large pair!

http://forums.pelicanparts.com/uploa...1693254976.jpg
Michigan, 1940...
Caption
Fifteen farmers are camped along the roadside during cherry picking season. Berrien County, Michigan. There is one pump for these families. This picture shows a mother and her son at one of the camp sites.
Source
Farm Security Administration

http://forums.pelicanparts.com/uploa...1693254976.jpg

http://forums.pelicanparts.com/uploa...1693254976.jpg
NEW CALEDONIA.
Original caption. North American B-25-Js, needing repair, are parked at the 13th Air Depot on New Caledonia, January 1944. (N.A.)

http://forums.pelicanparts.com/uploa...1693254976.jpg

http://forums.pelicanparts.com/uploa...1693254976.jpg

Robert Coats 08-28-2023 01:01 PM

Quote:

Originally Posted by GH85Carrera (Post 12077472)
HOW TO DRIVE IN ATLANTA:
1. You must first learn to pronounce the city name, Atlana. Old-timers are still allowed to call it Alana.

When I moved to ATL back in '86, the first directions I got were, "Get on I-285, exit at Peachtree, and I'll be at the Waffle House."
(285 is a ring/loop road, there are 100+ streets with 'Peachtree' and there are at least 2-3 Waffle Houses at every exit)

Random Image:

https://i.imgur.com/ABmpAsH.png

GH85Carrera 08-28-2023 01:15 PM

I used to drive over through Atlanta to Road Atlanta from Montgomery, AL. Even in the early 1970s it was horrid traffic. Eastman Kodak held one day classes to teach quality control for processing film, and other subjects. It was always horrid to get to the building. It was back when underground Atlanta was a fun place to go to eat and find some beer.

http://forums.pelicanparts.com/uploa...1693257021.jpg

http://forums.pelicanparts.com/uploa...1693257021.jpg
Oregon, 1939...
Caption
Grower provides fourteen such shacks in a row for his hop pickers. Josephine County, Oregon. Near Grants Pass...
Source
Farm Security Administration

http://forums.pelicanparts.com/uploa...1693257021.jpg

http://forums.pelicanparts.com/uploa...1693257021.jpg

http://forums.pelicanparts.com/uploa...1693257021.jpg

http://forums.pelicanparts.com/uploa...1693257021.jpg

masraum 08-28-2023 03:21 PM

Quote:

Originally Posted by daepp (Post 12077465)
Ok, I'm the idiot in the room, what's that "nib" for on top of the saw blade?

Quote:

Originally Posted by Crowbob (Post 12077471)
To scribe the piece to be cut instead of sawing through your thumbnail. Invert the saw, using your thumb as a backstop for the saw, make a notch with the nib, right the saw, make the cut, invent a new swear word.

I'm a member of a few facebook old hand tool groups including one that's dedicated specifically to saws. I've heard that a couple of times.

I've also heard more than one of the resident experts say that's probably not the case. More than one person has said "try it and you'll find the nib will break off".

The current consensus among the most knowledgeable folks is "it's for decoration". Most of the saws with nibs are old, and that's back when "simple" tools were still very expensive and had more decoration.

Quote:

Originally Posted by Zeke (Post 12077507)
I have looked for the reason for the nib and the overwhelming consensus is no one knows. It's been there since saws were made on some.

If you do as you say on a cross cut, it will rip the corner off the board giving you the last thing you want to see. On a rip it might not make any difference but you mostly see nibs on crosscut saws. At least that has been my experience.

I have a small collection of old saws and I've sharpened and set a few with mixed results. Nothing beats a machine but old timers had to sharpen on the job. I suspect as with anything, some did it better than others.

I worked as a super for a 2nd gen contractor whose father was a Swedish carpenter from the old country. I worked with another Swedish carpenter old enough to be my dad. These guys taught me a lot.

One of the great stories was about hand saw sharpening. As it was told, once done with the saw, the carpenter would angle the saw down say 30º with the teeth up. He then placed a needle at the handle end and it was expected to slide down the row of teeth between the sets and sharpening angles. Each tooth is sharpened at 2 angles WRT to the blade and then set.

Running the outside of the teeth gently along a stone one time produced perfection.

That's fascinating info. Thanks for posting.

https://i.pinimg.com/originals/d9/d7...a801492415.jpg

https://www.antiekvalentijn.com/VA%2...9%20schaaf.jpg

http://forums.pelicanparts.com/uploa...1693264845.jpg
http://forums.pelicanparts.com/uploa...1693264845.jpg
http://forums.pelicanparts.com/uploa...1693264845.jpg
http://forums.pelicanparts.com/uploa...1693264845.jpg
http://forums.pelicanparts.com/uploa...1693264845.jpg

masraum 08-28-2023 03:23 PM

Yvonne Craig

http://forums.pelicanparts.com/uploa...1693264973.jpg

Robert Coats 08-28-2023 05:25 PM

Quote:

Originally Posted by GH85Carrera (Post 12077556)
It was back when underground Atlanta was a fun place to go to eat and find some beer.

Ever get one here?

http://www.atlantatimemachine.com/im...928%20muhl.jpg

From AtlantaTimeMachine.com:

"At its zenith in 1972, Underground was all things to all people.

That probably accounted for the diverse popularity of a place such as Muhlenbrink's, located near the entrance, where the legendary Piano Red held court. One night, the entire cast of "The Waltons" showed at Muhlenbrink's (by bojan). On their heels of John Boy and Co., came Gregg Allman, sipping Chivas Regal mixed with Coca-Cola, accompanied by Cher. Exit Allman and enter the Rolling Stones, big fans of Piano Red, who annually did an European tour.

The partying was so heavy in those days, the joke around town was the Legislature was about to change the divorce laws to make the grounds adultery, incompatibility and Underground.
"

A930Rocket 08-28-2023 06:21 PM

Quote:

Originally Posted by Robert Coats (Post 12077550)
When I moved to ATL back in '86, the first directions I got were, "Get on I-285, exit at Peachtree, and I'll be at the Waffle House."
(285 is a ring/loop road, there are 100+ streets with 'Peachtree' and there are at least 2-3 Waffle Houses at every exit)

I moved to Atlanta the summer of 76. You’re not kidding when it comes to street named Peachtree…

Peachtree St.,
Peachtree Dunwoody,
Peachtree Road,
Peachtree Creek Road.
Peachtree Lane.
Peachtree Avenue.
Peachtree Circle.
Peachtree Place.
Peachtree Drive.
Peachtree Plaza.
Peachtree Way. etc.

I went to look at a motorcycle one afternoon. I got on 285 at Shallowford and was supposed to get off at Lavista. I missed the exit and got to College Park before I realized I had gone too far. It would’ve been closer to keep going, but I made a U-turn, and went back. Saw the bike, but didn’t buy it.

Then there was the Atlanta Braves pitcher that was scheduled to start the game. He got lost and drove around 285 a dozen times before he found the exit and got to the stadium downtown.

Preparing for the impending hurricane today… 🙄

http://forums.pelicanparts.com/uploa...1693275725.jpg

Racerbvd 08-28-2023 07:56 PM

http://forums.pelicanparts.com/uploa...1693281324.jpg
http://forums.pelicanparts.com/uploa...1693281324.jpg
http://forums.pelicanparts.com/uploa...1693281324.jpg
http://forums.pelicanparts.com/uploa...1693281324.jpg
http://forums.pelicanparts.com/uploa...1693281324.jpg
http://forums.pelicanparts.com/uploa...1693281324.jpg
http://forums.pelicanparts.com/uploa...1693281324.jpg
http://forums.pelicanparts.com/uploa...1693281324.jpg
http://forums.pelicanparts.com/uploa...1693281324.jpg

WPOZZZ 08-28-2023 09:35 PM

Quote:

Originally Posted by Racerbvd (Post 12077784)

https://pics.jilljuck.com/content/ma...e4268d4310.jpg

GH85Carrera 08-29-2023 04:58 AM

http://forums.pelicanparts.com/uploa...1693313762.jpg

http://forums.pelicanparts.com/uploa...1693313762.jpg

http://forums.pelicanparts.com/uploa...1693313762.jpg

http://forums.pelicanparts.com/uploa...1693313762.jpg
Aerial view of Pearl Harbor naval base looking southwest, Honolulu, Oahu, Hawaii, October 30, 1941

http://forums.pelicanparts.com/uploa...1693313762.jpg
Camping in Florida is fun! :eek:

http://forums.pelicanparts.com/uploa...1693313762.jpg


All times are GMT -8. The time now is 07:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.