Pelican Parts Forums
Page 5095 of 8044 « First « Prev 4095 4595 4995 5045 5085 5093 5094 5095 5096 5097 5105 5145 5195 5595 6095 Next » Last »
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   Off Topic Discussions (http://forums.pelicanparts.com/forumdisplay.php?f=31)
-   -   Stijn!! (http://forums.pelicanparts.com/showthread.php?t=488213)

HHI944 12-07-2013 07:13 PM
Yeah, I wouldn't say no to a truly well spec'd AR10.....but I'd really rather have a nice basic bolt action .338 with a good scope.....god that round has power!

Rick V 12-07-2013 07:16 PM
My next is going to be a Barrett 98B in 338LM. I almost had the 6K for it when I got laid off and had to use the money to live

HHI944 12-07-2013 07:16 PM
I mean seriously....... 4500-5000lbs/ft of knock down is insane! Through five layers of armor for a kill shot at 1km?!?

Hey rick, check my other thread please.....I need a little advice on finishing this pistol up

Rick V 12-07-2013 07:29 PM
I would buy a shorter tube based on the picture. I am not a fan of having the end of my barrel, covered at all. and not really into hacking the ends of things off to make them fit

HHI944 12-07-2013 07:35 PM
friggin free float rails ain't cheap....even the cheap ones ain't cheap! that's why I'm toying with chopping it down a bit....can you cold blue aluminum???

Rick V 12-07-2013 07:37 PM
Not sure but I am sure David (Targa) would know

GH85Carrera 12-07-2013 08:10 PM
Back from the PCA dinner.

http://img.tapatalk.com/d/13/12/08/u4e4yzap.jpg

This is one of the many views out the windows.

I got to sit next to Sid for dinner. It was a great dinner for an old geezer like me. I got to see some other old timers of the club.

Jim Richards 12-07-2013 08:36 PM
Quote:
Originally Posted by Rick V (Post 7795194)
Well just got back from Beth's Christmas party, and it was sad to come home. Lanna just got parked for the winter. :(
Along with her yearly dis-assembly and cleaning she gets a valve adjustment and the window regulators tightened up the sunroof is going to get new cables and I am going to do the bronze bushings in the petal cluster and adjust the clutch.
When I did the sunroof cables on the 73E, the replacement cables were 964 parts. Thicker than the original equipment on my 73E and a bugger to install. :mad:

slodave 12-07-2013 08:49 PM
Shifter bushings in the 911 - done! Not too difficult, but needed to cut an allen key to fit the tunnel to get a set screw out.

porsche4life 12-07-2013 10:15 PM
Quote:
Originally Posted by GH85Carrera (Post 7795270)
Back from the PCA dinner.

http://img.tapatalk.com/d/13/12/08/u4e4yzap.jpg

This is one of the many views out the windows.

I got to sit next to Sid for dinner. It was a great dinner for an old geezer like me. I got to see some other old timers of the club.
It was a good dinner Glen! I'm glad the board decided to move it. Very cool location. :D

Rick V 12-08-2013 04:58 AM
Morning Y'all. I woke up to the sounds of sleet/ice, it has been coming in waves, we are in a lull right now but it could be an interesting day for someone, just not me

slodave 12-08-2013 05:19 AM
Up way too early once again. Sigh.

Rick V 12-08-2013 05:22 AM
You joining my schedule Dave?

slodave 12-08-2013 05:42 AM
Only on certain Sundays.

GH85Carrera 12-08-2013 07:40 AM
My engine is starting to look like an engine again not just a pile of parts.

http://img.tapatalk.com/d/13/12/08/zuqaje7e.jpg

Purdy studs.

Rick V 12-08-2013 08:23 AM
Is that the low compression version suitable for ethanol?

Porsche-poor 12-08-2013 08:35 AM
Well Murphy got loose last night. Car all loaded to go battery is dead. Get to gig bass rig rolling along stage wheel snaps off. Now I have to figure out how to get the car jumped while its stuck in the garage.

GH85Carrera 12-08-2013 08:52 AM
Quote:
Originally Posted by Rick V (Post 7795714)
Is that the low compression version suitable for ethanol?
What? Not all the studs are in there yet when the picture was taken. Is that what you mean?

Rick V 12-08-2013 09:15 AM
Quote:
Originally Posted by GH85Carrera (Post 7795741)
What? Not all the studs are in there yet when the picture was taken. Is that what you mean?
It's a mechanic joke usually reserved for a block with no head on it. E.G. low compression

Rick V 12-08-2013 09:16 AM
Quote:
Originally Posted by Porsche-poor (Post 7795728)
Well Murphy got loose last night. Car all loaded to go battery is dead. Get to gig bass rig rolling along stage wheel snaps off. Now I have to figure out how to get the car jumped while its stuck in the garage.
A battery charger will usually get the job done


All times are GMT -8. The time now is 12:32 AM.
Page 5095 of 8044 « First « Prev 4095 4595 4995 5045 5085 5093 5094 5095 5096 5097 5105 5145 5195 5595 6095 Next » Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.