source for turbo "heat blanket"

[raceman]

l`ve got a glass rear bumper,any heat from my new turbo system that l can contain is a good thing.Have any of you seen the turbo blankets that are fitted onto the hot side of the turbo? l know about the heat wrap,l`ll need that too but the cute little blankies,that`s what l`m really after.any help appreciated..

[Bill Verburg]

Heat Shields

[5axis]

Here is what I am running on mine.. plenty of material to screw it up and do it over if required

http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=4782&prmenbr=361

[89turbocabmike]

Are there any down sides to wrapping the turbo?

[350HP930]

A hotter turbo is one of them.

Since radiative heat is your biggest worry you could buy some thin sheet aluminum and place a shield somewhere between the turbo and bumper.

That way the bumper is protected and the turbine housing can still shed heat too.

[5axis]

Originally posted by 350HP930
A hotter turbo is one of them.

I make the time to let her cool down before shutdown.. listen to song on the radio or a couple of Ramones tunes on disk.

[sammyg2]

Try turbo city, www.turbocity.com
they might have what you need.

[RarlyL8]

I run a fiberglass bumper also -- but do not have a heat planket on the turbo. I put one on the inside of the BUMPER. That way I know it will never be in danger from the heat. There is a large air barier between the turbo, muffler, and bumper blanket that helps as well.