|
|
|
|
| Author |
|
|
Registered
Join Date: Sep 2006
Location: North Salem NY
Posts: 59
|
Windshield problem
I've just gotten a 1973 911 T targa. Overall the car is in good shape but The seals on the windshield at the top and bottom are pulling away a little - causing about a 2 inch long gap between the seal and the frame. it is a very small opening. Also the windshield is very slightly loose. I think the seals are old but they have no signifcant crakcing. It is not the orginal windsheild. So I am wondering if it is the seals or an aftermarket windshield that does not fit just right ? can the seals shrink over time ? But would they shrink in just two places?
thanks Crosby
__________________
Cros |
||
10-04-2006, 05:32 PM
|
|
|
+ lurking - contributing
Join Date: Dec 2005
Location: Atlanta, Georgia
Posts: 626
|
__________________
87 930 96 BMW M3 Coupe 89 951 08 Astra H Peugeot moped |
||
|
10-04-2006, 07:26 PM
|
|
|
Registered
Join Date: May 2001
Location: Peoples Republic of Long Beach, NY
Posts: 21,140
|
__________________
Ronin LB '77 911s 2.7 PMO E 8.5 SSI Monty MSD JPI w x6 |
||
|
10-04-2006, 09:01 PM
|
|
