converting a 911 to 964

[Fast82930]

Here's my B&B system 930 / 964 system. They have a jig for making a 930 system work with 964 bumper cutouts..

[luyckxglen]

ye nice stuff but thats for a turbo could you do me a favor what is the distence between the centers of the 2 exit pieces? thx

[Fast82930]

Point is, B&B / Fabspeed etc. can make u what u need, else.. a good muffler shop to weld up the perfect fit.

[luyckxglen]

ye gues so probley gona buy the dansk then cause its the cheapest to make it fit.. otherwise id have to pay alot..

[darrin]

Originally Posted by luyckxglen

ye no you dont understand , my read bumper has 2 holes in it.. i just need a muffler with 2 outletpipes

The threads above are advising you that if you're looking to keep costs down, you might be best off having a muffler shop weld a second outlet onto your existing muffler (making it work with the second hole) rather than buying/modifying a new 2 outlet muffler.

That said, you'll find that a lot of folks abandon their two outlet mufflers (or cap the second outlet) after they discover that the second outlet causes the muffler to drone/resonate at the 2-3k rpm range we generally drive our cars at.

[luyckxglen]

what do you mean with resonate? anyway ima buy a danks dual outlet exhaust and make that fit my bumper.greetz