Pelican Parts Forums
Page 36 of 36 « First « Prev 26 34 35 36
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   Post your ITB Setup (http://forums.pelicanparts.com/porsche-911-technical-forum/925845-post-your-itb-setup.html)

ToySnakePMC 12-11-2025 07:20 AM
Quote:
Originally Posted by Black 993 (Post 12576723)
You guys with lower COP's, are you using a bracket to secure them in? I'm converting my 993 to COP and need to figure out a bracket (stock plastic valve covers).
I believe I purchased a set of coil brackets from Turbo Kraft. I had them on top - until I went twin plug about 3 mo later, lol. Moved them lower - even though the Audi COP do seem to fit tightly. I was worried with heat cycling one of them would attempt an unauthorized leave of absence...

911Ren20 12-11-2025 09:21 AM
slowly chipping away.

https://i.imgur.com/G9YkTV5.png

montauk 12-11-2025 11:23 AM
Quote:
Originally Posted by 911Ren20 (Post 12576910)
slowly chipping away.

https://i.imgur.com/G9YkTV5.png
Hang in there!!!

And one suggestion - because I had to remove a washer from a cylinder - cover every opening.

911Ren20 12-11-2025 11:32 AM
This thread is my motivator. It's got so many beautiful set ups

and yes, I 3d printed hole covers. I plan to have the engine power washed next week.


All times are GMT -8. The time now is 02:21 AM.
Page 36 of 36 « First « Prev 26 34 35 36
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.