Job well done. I have my bumpers front and rear ready to go. I just havent got round to doing it yet. My car is alos black so you have given me more inspiration to make the conversion sooner rather than later.

Pete, Where are you in the UK? Happy to discuss details further if you want.
Andrew

Hi Andrew. I am in kent. Would be great to catchup. You can contact me via my website. Click on the link in my signature for contact details.

Has anyone ever figured out a way to mount a splitter to the Ruf front bumper?
...or a source for one?
Running a 3.8 wing on the back now, and the rubber vertical dam in front does not provide
downforce in front necessary.
The shape of the bottom of the Ruf front bumper is not a flat plane, has a bit of an arc in it, that is aesthetically pleasing but makes it difficult to mount a true splitter.

Thanks,
Nick

Make your own, we did. ABS plastic, patience, and about 20 rivets to the underside lip -

any photo's craig?

Nice car Andrew!

Heh. Doesn't mean there wasn't one. Photos of my daily driver in Hampshire a couple of years ago for a discussion about ride heights:

http://forums.pelicanparts.com/uploa...1226861668.jpg
http://forums.pelicanparts.com/uploa...1226862073.jpg

Sorry about the gloom. November in Blighty...

For the other poster, this splitter is just a rubber strip sandwiched behind an aluminum strip, pop-riveted to the base of the bumper cap.

It's pretty hardy (I've replaced two pop rivets in 12,000 miles), and ground clearance is rather better than the factory splitter on a 944 with US ride height. You do need to remember to go on/off ramps at an angle...

Hi Spuggy

I cant believe it, thats two black 911's with RUF in the UK in as as many weeks.

Awesome. I must get round to fitting mine.

Have you still got the car?

Why yes, you should :)

Sure, I drive it everyday. It owes me too much to sell it. And 400 FWHP isn't going to bore me anytime soon.

It's no longer in the UK, though.

Spuggy - very nice!
Sorry I didn't see it when it was in the UK. Where did you source the bumpers?
Andrew

http://forums.pelicanparts.com/uploa...1226945564.gif



http://forums.pelicanparts.com/uploa...1226945991.jpg

Just to hold this tread alive: Im going To holland to pick up my Ruf bumpers. tomorrow :)
Cant wait

More wholesome Ruf goodness. These are BW repros, just waiting on the nerf bars to install. Plus an early Carrera tail and a custom MK muffler :)

http://forums.pelicanparts.com/uploa...1238766326.jpg
http://forums.pelicanparts.com/uploa...1238766370.jpg
http://forums.pelicanparts.com/uploa...1238766432.jpg
http://forums.pelicanparts.com/uploa...1238766484.jpg

Pretty badass Wavey!

So now, here they are now there only is a bit of work to be done:D
I'll have to say thank you to this thread, to make the fitting a lot more
easy, with all the good info about the bumpers.http://forums.pelicanparts.com/suppo...eys/yltype.gifhttp://forums.pelicanparts.com/uploa...1238922491.jpg
http://forums.pelicanparts.com/uploa...1238922566.jpg

Paint job done:Dhttp://forums.pelicanparts.com/uploa...1239174548.jpg
http://forums.pelicanparts.com/uploa...1239174599.jpg

Very nice Brian! And welcome to Pelican! Please post more pics of your car when the new bumpers are on, and tell us more about it.

Brian, where about in Holland did you get the bumpers from?

Hi Scott

Van Kessel Sportscars, Deurne Holland

Ok. It's a 74' 2.7s 175 hk, it has been on a diæt and loss a few pounds on, seats , sidemirrors, bumpers, few carpets left, no sparewheel, But heavy wheels;).http://forums.pelicanparts.com/uploa...1240005955.jpg
http://forums.pelicanparts.com/uploa...1240005976.jpg
http://forums.pelicanparts.com/uploa...1240006007.jpg