I would attend. Last time I booked but had a health issue with Mom.

Can you record or live stream??

I've said it before, but I'm definitely in if this class starts up again!

Tony, your class looks like a great way to get me over my apprehension of a rebuild. If you hold another class, count me in.

-- Chris
'77 911S Targa

Another Engine Rebuilding Sessions in April 2020..........
 

Chris,

A few of them who attended the “Introduction to Engine Rebuilding” are doing their first engine rebuilds. Attending in these sessions will not make you a better engine rebuilders but will help you overcome the fear and anxiety most people had before coming to these sessions. And you will be prepared to tackle any problem with more confidence than before.

As of today, I have not secured a room to conduct the two-day sessions (8-hour/day). I am working on this with the help from people in this forum. Due to family travel plans, the date is tentatively planned for April 2020. All sessions will be held on weekdays and no weekend. Monday to Friday only. I was exhausted after a two-day session and will need a break between each group.

So who are interested in attending the April 2020 Spring sessions? Let’s have a head count. Reply to this post or send me an email @ ATD911@hotmail.com. Thanks.

Tony

Count me in!

I’m in.


Sent from my iPad using Tapatalk

I would definitely come to this

Course, I am in!

Serge

Thanks Tony, count me in. I just sent you an email as well.

I am very interested in this, please count me in.

Thanks,
David

emailed you tony... frank

I for one would be interested in paying for a video version of the class to help defray the cost and of course make sure Tony gets compensated for the effort.

I'm in... rich

Updated participants list............
 

These are some of the people who have shown interest in attending the next sessions for the Introduction to Engine Rebuilding classes (April 2020). If you have not provided your information please forward them to me.

Gretz
MHackney
Nditiz1
Carl S.
Geneman
BRSHAP
Special CK
Trippyloaf
Marc718B
EatDog
Nene
David in VA
Oilcanboyd
Alexm930

I might have missed some names please feel free to call my attention.

Please send your full name, Email, and tel.# for my record and will keep them private. I will be using the screen name/s or first name in this post. Thanks.

Tony

Hey Tony count me in!

Kevin

Hi Tony,

I just saw your thread on the 2020 class. Have you had any West Coast members sign up?

Cheers
Trevor


Sent from my iPhone using Tapatalk

Introduction to engine rebuilding class......
 

My brother and I flew out from LA to the April class last year and it was totally worthwhile. Learned a lot, met some really cool Porsche enthusiast and wasn’t afraid to tackle an engine rebuild after the class.


Sent from my iPhone using Tapatalk

That’s great to hear


Sent from my iPhone using Tapatalk

Tony, just sent you my info. Looking forward to it!

Need your information..........
 

Need the full name and email address of the following members:

Trippyloaf
Marc718B
EatDog
Nene
David in VA
Oilcanboyd
Alexm930

Please PM or email. So I could include your name/s in the list.

Kevbo and Bugstrider added to the list. Thanks.

Tony

Glad to see the interest in this.

I’ve been offering hands- on Porsche engine classes for 11 years, (www.theknowledgegruppe.com)and have a dedicated training facility where I host these, here in Georgia. World- wide attendance is the norm.. Last year we added the aircooled classes, and have two coming up for the remainder of 2019. The classes are grouped “early” up to 964, and “late” which is 964/ 993. Everything is hands on, and I also do an online class as a pre- cursor.

People are always looking for knowledge, and they learn a lot from doing the work themselves.

Glad to see something like this going on for the west coast. I keep my facility set up full time for classes, and though I am asked weekly to travel to the west coast to host classes, I am not willing to do it. I have things set up very efficiently, and its a comfortable learning environment, to say the least.

Bruce Anderson offered these classes back in the day, and I’m glad folks are still sharing the information. Wayne Dempsey's book is also a great resource for starters.

Introduction to engine rebuilding class......
 

So far, I haven’t seen anything like this being offered on the W.C. On a class like this. That’s why when I saw one being offered, I requested to be included as dates are finalized.

I wished I had the resources to be able to drop it off at a shop. However, since I don’t have an open checkbook, I have to pick my battles. I even considered to volunteer my days off during the week at a local shop as a gopher in an attempt to glean some knowledge. But I’m not in the inner circle of the two shops I know of.

Updated list........
 

Above is the updated list. The schedule date is April 2020 to be held in Norristown, PA 19401. The exact address is to be determined and finalized later this year. Thanks.

Tony

Thanks Tony


Sent from my iPhone using Tapatalk

Please add me to the list.

Add me to the list as well.

Thanks
Anthony


Sent from my iPhone using Tapatalk

Updated list.........
 

Below is the list of members that have signed up to attend the Introduction to Engine Rebuilding Classes in April 2020. We have about 10 months to prepare for this event and use the experience we gained from the past.

Gretz
MHackney
Nditiz1
Carl S.
Geneman
BRSHAP
Special CK
Trippyloaf
Marc718B
Nene
David in VA
Kevbo
Bugstrider
Mixed76
David Borden
SoCalSK8r

I might have missed some names please feel free to call my attention.

Please send your full name, Email, and tel.# for my record and will keep them private. I will be using the screen name/s or first name in this post. Thanks.

Tony

I’m ready!

We have enough interest to proceed.......
 

Below is the list of members that have signed up to attend the Introduction to Engine Rebuilding Classes in April 2020. We have several months to prepare for this event and use the experience we have gained from the past.

Gretz
MHackney
Nditiz1
Carl S.
Geneman
BRSHAP
Special CK
Trippyloaf
Marc718B
Nene
David in VA
Kevbo
Bugstrider
Mixed76
David Borden
SoCalSK8r

Livetopedal
BV911
Eatdog

If I missed some names please feel free to call my attention.

Please send your full name, Email, and tel.# for my record and will keep them private. I will be using the screen name/s or first name in this post. Thanks.

Tony

Hi there Tony, you got my PM, asked me to post in here, so here you go…

Thanks for putting this together!

PM sent!

pm and email sent

PM sent

To be clear, the class is two 8-hour sessions or is the class going to last multiple weeks with two 8-hour sessions a week?

PM Sent

Schedule of classes........
 

The classes will be conducted 2 days in a row (8:00 AM ~ 5:00 PM) plus an extra hour who wanted to stay. There will be an hour lunch break. The sessions will be Monday & Tuesday and Thursday & Friday. The venue will be held in 19401 (zip code) and exact address not yet finalized. Below are the schedules.

First session: April 13 & 14, 2020 (Monday & Tuesday)

Second session: April 16 & 17, 2020 (Thursday & Friday)

Third session: April 20 & 21, 2020 (Monday & Tuesday)

Fourth session: April 23 & 24, 2020 (Thursday & Friday)

Fifth session: April 27 & 28, 2020 ( Monday & Tuesday)


I like to limit the number of attendees per session from 10 to 8 this time. So participants would have more time and hands on experience tearing down and assembling the engine. Thanks.

Tony

Additional participants.......
 

Below is the current list of members that have signed up to attend the 2nd. Introduction to Engine Rebuilding Classes in April 2020. We have several months to prepare for this event and use the experience we have gained from the past.

Gretz
MHackney
Nditiz1
Carl S.
Geneman
BRSHAP
Special CK
Trippyloaf
Marc718B
Nene
David in VA
Kevbo
Bugstrider
Mixed76
David Borden
SoCalSK8r
Livetopedal
BV911
Eatdog

Setho
Blucille
Malay
Peter 916

If I missed some names please feel free to call my attention.

Please send your full name, Email, and tel.# for my record and will keep them private. I will be using the screen name/s or first name in this post.

At the moment we have enough people in the list to do the 2nd. Introduction to Engine Rebuilding Classes in April 2020. Thanks to everyone.

Tony

Please count me in.