![]() |
|
|
|
Registered
Join Date: Oct 2002
Location: Atlanta
Posts: 273
|
Rear Caliper inserts question
I did a brake job on my 90 C2 this weekend. The damper inserts for the rears were not the right size, although I verified the part number. There were none on the pads I removed.
The calipers on the rear are 2 piston. Does anyone know the insert diameter I need? These things are squeeling more now than they were before.
__________________
Mark H Class Race Car Project Old flames: 1999 C2 Race Car #78; 1983 SC Race Car; #78; 1990 C2; 1978 SC Race Car #78; 1988 Carrera; 1977 911S |
||
![]() |
|
Registered
Join Date: Feb 2001
Location: Viera FL
Posts: 5,642
|
Should be a 996.352.086.01
2 required per caliper. AFJ
__________________
Es geht nicht darum wie schnell man faehrt, sondern wie gut man schnell fahren kann. Ihr Brunnen der nutzlosen Porsche Information |
||
![]() |
|
Registered
Join Date: Oct 2002
Location: Atlanta
Posts: 273
|
Thanks, but 964-352-096-01-M260 Is what I ordered. and they are too small. Evidently, Porsche tried a couple of things with the inserts in 90 and 91 and there are a couple of variations.
Just talked to someone who said I needed a 44mm damper, which is 965 351 096 00.
__________________
Mark H Class Race Car Project Old flames: 1999 C2 Race Car #78; 1983 SC Race Car; #78; 1990 C2; 1978 SC Race Car #78; 1988 Carrera; 1977 911S |
||
![]() |
|