Really pissed me off. The front was the whole reason I was doing them, the rotors are well out of spec. ...
At least the rear is done through. ... they're a pain in the ass because of the parking brake circuit

when i did the cylinder head on ingrid, i am pretty sure i spent as much time running back and forth to the local parts shop as i did wrenching. i kept finding stuff that needed replacing while i was in there.

it is quite the car you have, HHI.

My landy was down for weeks when i did a top end rebuild. The work was all easy and quick, but I kept finding 'one more thing' and the only place for parts is roversnorth

The ONLY place I could find the bracket that mounts the rear lift gate struts to the frame was called Maubi and was in England. I ordered a left and a right. One was in an OE Rover baggie the other was aftermarket. Shipping cost twice as much as the brackets for a total of $35.

I must be related to the wicked witch of the west cause I'm melting. Upper 80's yuck.

upper 80's? LOL! it's been over 100F here for the last few days. but its a dry heat.... :D

Triple yuck.

It was 102F and 40% here.

104f, 11%

79 and 50% right now. Was 88 earlier.

Its something comparable to the fires of hell out here... Waiting for it to cool down as the sun goes down.

Yuck.

Bluddy Cold here

http://forums.pelicanparts.com/uploa...1372559784.jpg


Evening Gents


Good day for yard work. Having a break and a cuppa tea atm.

I wanna move there.

Correction. Recorded high here was 105F

One tequila....


Two Tequila....

Three tequilla....


Floor!!! ;)


Tomorrow is going to be a long day... Drivers meeting is at 730am. I don't get off the track until almost 5, and its a 3 hour drive back to reno.... :/

You guys are wimps. 119 here. :)

My oven got up to 300°F, warmed the pizza slices nicely.

Proper right temperature ;)

Woohoo! Silverstone in 6 mins.