Another 930 Engine Conversion

[930/66]

Installing Elbow Hose and TK Adapter LLK:



Installing 4-Speed Transmission:





Change OEM Starter to High Torque Starter:

[bryant4]

.

Awesome thread. Beautiful work!

[930/66]

[930/66]

[930/66]

[930/66]

Tial Wastegate with 0.4 Bar Spring:

[930/66]

[930/66]

[930/66]

[930/66]

So i have 2 Settings 0.4 and 1.0 Bar of Boost.
The rear Wiper was removed and now i have the possibility to take the Rear-Wiper Switch to switch the valve....

[930/66]

First i must say the Parts look good and the Customer Service from Chris is nice!

The Intercooler-Kit had 3 errors:

#1 conflict with the air filter box
#2 connection to supplementary air slide wrong
#3 Connection to the turbocharger intercooler welded wrong (can`t close my tailgate)

I have changed the air filter box and cut the connection for the auxiliary-air device

#3 make my Welder right. Chris send me the reimbursement for that, Thanks Again!

[Strygaldwir]

I have to admit, the engine stand scared me a little

Glad it is in its proper place with no mishaps. Great work.

[proffighter]

No soft or plastic jaws for the bench vise? ts ts ts



But anyway, nice thread

[930/66]

Originally Posted by Strygaldwir

I have to admit, the engine stand scared me a little

I know he does not look stable

but better for engine and vehicle to use my unstable look stand as a normal jack

[930/66]

Originally Posted by proffighter

No soft or plastic jaws for the bench vise? ts ts ts

Roland you're scaring me, you see everything

[proffighter]

Originally Posted by 930/66

Roland you're scaring me, you see everything

But I do not say something every time I see

[930/66]

Oil Trip Tank, Adapter and Oil Line from GSF:









Muffler 76mm Diameter:

[930/66]

[930/66]

Zeitronics ZT-II (under Driver Seat)

- Zeitronix LCD Display
- Black Box Data Logger
- Wideband Air Fuel Ratio Meter
- Boost Sensor
- RPM Signal logging
- Knock Sensor

[Pat RUFBTR]

Originally Posted by 930/66

Hello 930/66,
To avoid of installed(settled) this thermal protection there is another solution than I envisage seriously, that to make a ceramic treatment(processing) on the collector of escape by the company Zircotec, it is not given but do not apparently very effective.

I have just joined but I am your restoration(catering) for a long time as that Spenny-b, bravo, your work is great(tremendous)!