What did you do to your 911 today?

[Alex599]

Upgraded my steering wheel. I love the look of the 930S wheel

[996AE]

PSS10 adjusted to 8 rear 6 front for canyon New Year early morning run.

[danco_]

Took a photo of it and drove to the post office where someone yelled at me for driving too fast.

In the middle of my bumper tuck/bumperette re-section/center exhaust/rear reflector project, decided to put enough parts back together to take it for the first drive of the new year. Note rare RSR rear plate mount.

Cool and clear here in Seattle (rare this time of year). The engine seeed especially responsive and appreciative of the exercise, and even the transmission decided to shift more sweetly than usual.

[acme911]

Spent the day with with my 2 girls.

[acme911]

Originally Posted by madcorgi

In the middle of my bumper tuck/bumperette re-section/center exhaust/rear reflector project, decided to put enough parts back together to take it for the first drive of the new year. Note rare RSR rear plate mount.

Cool and clear here in Seattle (rare this time of year). The engine seeed especially responsive and appreciative of the exercise, and even the transmission decided to shift more sweetly than usual.

Terry,
Nice to be able to get the car out. That rare plate mount should up the value. Weather is crisp down here too. Finishing up the brakes/suspension and hope to get mine out on the road tomorrow.

[PCHOutlaw]

Pulled aftermarket power windows.

[RSBob]

Originally Posted by madcorgi

In the middle of my bumper tuck/bumperette re-section/center exhaust/rear reflector project, decided to put enough parts back together to take it for the first drive of the new year. Note rare RSR rear plate mount.

Cool and clear here in Seattle (rare this time of year). The engine seeed especially responsive and appreciative of the exercise, and even the transmission decided to shift more sweetly than usual.

For better continuity, I would recommend painting the visible white areas under your grill semi-gloss black.

[BRAIDusa]

Originally Posted by chrisbalich

everything i know about rally, i know from watching youtube. LOL
so i'll defer to you for actual knowledge. (i would think that light wheels would be ideal for rally like they are for tarmac. less unsprung weight makes the suspension work better and all that.) maybe i just need to head up to MI one weekend and watch the festivities.

what i do know for sure is that they look fantastic.

Thanks. I think I agree.

Yes, lighter is always better but only as light as you can get away with. These are NOT designed for stage rally but I know of at least one big Volvo running these in Scandinavia, even though the factory cringes whenever you mention it LOL. BRAIDs are well designed and well built wheels and the factory are quite conservative so sometimes we can get away with things we are not supposed to. Plus, I drive like an old grandma anyway.

[BRAIDusa]

Originally Posted by danco_

Took a photo of it and drove to the post office where someone yelled at me for driving too fast.

Covers?

[chrisbalich]

Originally Posted by BRAIDusa

Covers?

BBS turbo fans
They go on top of BBS or similar wheels. old tech for cooling brakes. i like the way they look, but not enough to pay for them.

[thefaculty]

Today I installed Rennline's 3-point front strut brace and made a little step-by-step for anyone doing the same:

RELEVANT LINKS:

PARTS: Strut Tower Brace - Truss Mount-Rennline, Inc.
INSTRUCTIONS: http://www.rennline.com/PDF/SB-809192.pdf
MANUFACTURER: Rennline.com - Porsche Performance Parts, Accessories & Race Parts for Porsche, BMW & Audi
BENTLEY MANUAL: Bentley Publishers - Repair Manuals and Automotive Books
BENNY OBSCENE: https://www.youtube.com/watch?v=ocBVewyjQsQ
HOME BUILT BY JEFF: https://www.youtube.com/channel/UCk_vb_SJctymCkwnF6sAwDg

[SKL1]

Got the windshield installed today- inching closer to getting it on the road. Waiting for the light assembly restoration to get finished (almost done), then the bumpers can go on...

[Noah930]

Took a rock to the windshield, tossed up by the Landcrusher in front of me. There goes $800 down the drain.

[Rob T.]

Originally Posted by acme911

Spent the day with with my 2 girls.

Had a LM1000 15 years ago. Great Motorcycles.

[VWLoosenuts]

Removed my old rockers and installed my 946 rockers on the passenger side Drivers side next week.

[Autoban]

Installed my Dansk 70 mm sport muffler. Was an easy job to get the old muffler off by just cutting the old bolts and the two straps. The Dansk is a nice fit. The two new straps I purchased, not so much. The bolts are too short. Even pre bending the new straps to get maximum length around the muffler, I could not get the two ends close enough together. After wasting a lot of time I finally got the bolt on the larger strap to engage, but on the shorter strap, no way. I finally did the smart thing and got a longer bolt (M10x1.5). Then it went in with no problem.

I like the new sound. Not too loud in the lower and middle RPM range, but nice sound at WOT. I also think the car pulls a little better in the mid RPM range, but I need to drive it some more to really be able to tell. Since it was cold when I did the test drive, I had to run the heat. When standing still, the smell of the new exhaust getting hot for the first time was pretty bad. Need to drive it a couple more times to get it nice and hot.

Juergen

[LSTR8R]

The real purpose for a yoga mat

[panzerfaust]

Originally Posted by acme911

Spent the day with with my 2 girls.

V50 monza ! fav of mine, you have great taste :-)

ive been trying to find one preferably in blue or white

[SoCalSK8r]

I’ll let the pics talk...still need to adjust the drivers side spacer by 1mm as I’m rubbing ever so slightly, then get an aligned.










Sent from my iPhone using Tapatalk